One for All URC-6210 Universal Remote User Manual


 
4 WWW.ONEFORALL.COM
Direct code set up
To set up the ZAPPER for your Television follow the instructions below.
1 Find your Television code in the Set-Up Code section (page 82-107). Codes
are listed by brand name. The most popular codes are listed first.
2 Make sure your TV is switched on (not on standby).
3 Press and hold the MAGIC key until the LED blinks twice(The LED
underneath the POWER key will blink once then twice).
4 Enter your 5-digit code according to the chart below.
The LED underneath the POWER key will blink twice.
5 Now, aim the ZAPPER at your Television and press POWER. If your
Television switches OFF, your ZAPPER should be ready to operate your
device.
VOLUME + = 1
VOLUME - = 2
CHANNEL - = 4
MUTE = 5
CHANNEL + = 3
706113_URC-6210-11_E_10t:Zapper_3 12-12-2007 11:56 Pagina 4