Filter
Top Products
10 WWW.ONEFORALL.COM
Controlling Colour & Brightness
Depending on the functions of your original remote control, the ZAPPER
may operate the colour and brightness settings of your Television.
Scan
Your ZAPPER comes with a special Scan function which lets you “scan”
through every programme available on your TV, VCR, Satellite or Cable Box.
For example, to scan the programmes on your TV:
1 Aim the ZAPPER at your TV. Press the TV key. Press and
release MAGIC then press the MUTE key.
The ZAPPER will send the command to advance through
all the programmes available on your Television stopping
at each programme for about three seconds. Remember,
you must aim the ZAPPER at your device the entire time
you are using scan.
2 When you find a programme you would like to watch,
simply press any key to stop the Scan feature.
Advanced Operation
then holdPressColour up =
then holdPressColour down =
then holdPressBrightness up =
then holdPressBrightness down =
TV
Note: You have 5 seconds to press the Volume or Channel keys for colour or
brightness adjustment after pressing MAGIC.
Important notes:
- To use Scan with your Video, Satellite or Cable Box, follow the same
instructions above, only press the VCR or SAT key during step 1.
- Scan may not function with devices that did not have a Programme +/- key
on the original remote control.