Filter
Top Products
Installing the Batteries
Your ONE FOR ALL requires 4 new “AAA/LR03” alkaline batteries.
1
Remove the battery cover from the back of your ONE FOR ALL by
p
ressing down on the tab.
2 Match the batteries to the + and - marks inside the battery case, then
insert the batteries.
3 Press the battery cover back into place.
See picture of ONE FOR ALL remote on page 2.
1 Magic Key
The MAGIC key is used to set up your ONE FOR ALL.
2 P
OWER (LED)
The POWER key operates the same function it did on your original
remote control. The red light (LED - Light Emitting Diode) underneath
the POWER key will light up every time a key is pressed.
3 Teletext Keys
These keys are used to operate the main Teletext functions. Of course,
your television must have Teletext capability.
TEXT ON: Puts the television in the Teletext mode.
MIX: Shows teletext and regular television simultaneously.
You may also use this key for subtitling. On some
televisions this function is accessed by pressing the
text key twice.
TEXT OFF: Switches the television back to regular viewing
mode. On some televisions, this may be done by
pressing the TEXT ON key several times.
EXPAND: Shows the top half of the Teletext page in larger let-
ters. By pressing again, you can see the bottom half
of the Teletext page enlarged. To return to regular
Teletext viewing, press the EXPAND key again, or
press the TEXT ON key, depending on your television.
16:9 This key provides the (16:9) wide screen view func-
tion, if available on your original remote).
HOLD/STOP: Stops changing pages.
Important note: For a more detailed explanation of Teletext and Fastext,
please refer to the manual of your television. Remember, different televisions
control Teletext and Fastext features in different ways. Not all of the Teletext
functions may be available for your particular model.
4 NUMBER KEYS (0-9, -/- -, AV)
The Number keys (0-9, -/--, AV) provide functions just like your original
remote, such as direct access channel selection. If your original remote
uses one/two digit input switching (-/-- symbol), this function can be
obtained by pressing the -/-- key. If your original remote has an 10 key,
this function can also be found under the -/-- key. If your original remote
has an 20 key, this function can also be found under the AV key.
The Keypad
Important notes:
-
Do not use rechargeable batteries.
- In order to avoid having to reprogram your ONE FOR ALL after you
r
emove the batteries, you will need to insert new batteries within 15
minutes.
WWW.ONEFORALL.COM 3
705071_URC-7525_S_10t.qxd:Ofa5_Digital_URC7555_EURO_10_Talen 04-12-2007 09:50 Pagina 3