Filter
Top Products
2928
USING KEYMOVER
The One For All 4-Device Video Expert remote control
includes a Keymover feature that allows you to map (or
copy) keys from one mode (i.e.,source mode)to another
(i,e,destination mode).
NOTE:The following keys cannot be mapped:TV,DVD,VCR,
CBL/SAT,SET,M.POWER,V.CONFIG,and macro keys F1~F4.
For example,if your VCR does not have volume control,
you can map the volume and mute keys from the TV
mode to the VCR mode as follows:
1. On the remote control,press and hold SET until
the LED blinks twice,then release SET.
2. Enter 9 - 9 - 4.
3. For the source mode,press TV once.
4. For the source key,press VOL +once.
5. For the destination mode,press VCR once.
6. For the destination key,press VOL + once.
The LED will blink twice indicating the key-
moved sequence is correct.
7. Repeat steps 1 through 6 twice more,
substituting VOL – and MUTE as source and
destination keys in steps 4 and 6.
Upon completion of the above procedure,you can now
use your One For All 4-Device Video Expert remote con-
trol to control the TV’s volume and mute in the VCR
mode,as well as in the TV mode.
CHANGING VOLUME LOCK (Continued)
To change Volume Lock back to the TV mode:
1. On the remote control,press and hold SET until
the LED blinks twice,then release SET.
2. Enter 9 - 9 - 3 and then press TV once.
The LED will blink twice.
3. Now,whenever you press VOL +,VOL –,or
MUTE on the remote control,volume will be
again controlled by your TV.
To Unlock Volume Lock:
1. On the remote control,press and hold SET until
the LED blinks twice,then release SET.
2. Enter 9 - 9 - 3 and then press VOL+ once.
The LED will blink twice.
USING THE MENU KEY
On your One For All 4-Device Video Expert remote con-
trol,the MENU key works just like the MENU key of your
original remote control and allows you to access the on-
screen menu of the component you have selected (e.g.,TV,
VCR, DVD,or CBL/SAT).
When you press MENU,the VOL+,VOL–,CH+,and CH –
keys will allow you to navigate and adjust the on screen
menu settings just like you would with your original
remote control.Also, the MUTE key becomes the Menu
Select key.
To exit out of the Menu mode, press MENU or EXIT to
return to normal operation.