Filter
Top Products
23
Changing the Camera Angle
If the scene was recorded from multiple angles, you can easily
change the camera angle of the scene you are watching.
Press On SCREEN during playback.
Press 2/3 until the Angle icon is
highlighted.
Press ENTER.
The angle menu appears.
Press ENTER to select the angle.
Each time you press ENTER, the angle
changes.
To turn off the angle menu
Press ON SCREEN or CLEAR.
The menu is switched off when no operation is performed for
about 5 seconds.
Using ANGLE on the remote controller
1 Press ANGLE on the remote controller during playback.
2 Press ANGLE or ENTER to select the camera angle.
Notes
• You can change the camera angle during still playback. The camera
angle changes to the new setting when you resume normal playback.
• If you pause a picture immediately after changing the camera angle, the
resumed playback picture may not use the new camera angle.
Angle : 2 Angle : 3Angle : 1
DVD
Using IntroScan function
IntroScan plays the first few seconds of each track on the Video CD
or CD similar to the scan feature that's on many car radios.
When playing a Video CD, press ON
SCREEN to display the Banner
Display.
When playing a CD, the Banner Display
appears on the screen automatically.
Press 2/3 until the IntroScan icon
is highlighted.
Press ENTER.
The INTRO indicator lights.
The first 10 seconds of each track will be
played.
Press £ to stop IntroScan playback and start
playing the current track entirely.
Note
After IntroScan goes through all of the tracks, it stops.
1
2
3
1
2
Using Banner Display
VCD
CD
Track : 1 Track : 2 Track : 3
3
4