Filter
Top Products
18
Changing the On-Screen Language
You can change the on-screen programming
language at any time.
1. Press
MENU
to display the main menu.
2. Use
SEL
s/t to highlight the fourth item,
then press
SET
.
Note:
The title of the fourth item differs
depending on the current language. If the
current language is English, the title shows
in Spanish and French (
IDIOMA/
LANGUE
). If it is in French, the title shows
in English and Spanish (
LANGUAGE/
IDIOMA
). If it is in Spanish, the title shows
in French and English (
LANGUE/LAN-
GUAGE
).
3. Press
SET
so the desired language
appears in parentheses below the title.
4. Press
MENU
to return to the normal screen.
Resetting the VCR’s Memory
If at any time you want to erase all settings, in-
cluding the time, local channels, and pro-
grammed events, eject any loaded tape then
press and hold
PLAY
and
REW
on the VCR for
at least 5 seconds. The VCR clears all settings
and turns off.
The next time you turn on the VCR, it performs
its initial setup sequence.
– – – – – – – MENU – – – – – – –
SET UP VCR
SET CLOCK
SET UP CHANNEL
IDIOMA/LANGUE
(ENGLISH)
SELECT
SET
END
: PUSH SELECT /
: PUSH SET KEY
: PUSH MENU KEY
– – – – – – – MENU – – – – – – –
PREPARAR VCR
FIJAR RELOJ
FIJAR CANAL
LANGUE/LANGUAGE
(ESPAÑOL)
ELEGIR
FIJAR
TERMINAR
: PULSE SELECT /
: PULSE SET
: PULSE MENU
SEL.
REGLER
FIN
: APP. SELECT /
: APP. SET
: APP. MENU
– – – – – – – MENU – – – – – – –
REGLAGE MAGNETOSCOPE
REGLAGE HORLOGE
REGLAGE CANAL
LANGUAGE/IDIOMA
(FRANÇAIS)
16-547.fm Page 18 Tuesday, July 20, 1999 4:45 PM