Filter
Top Products
41
Loosen the three screws on the lamp unit
and pull the lamp module out. (Note:
These screws may be loosened but
cannot be removed from the unit.)
Lamp Change Instructions - S V 5 0
Lamp C hange Ins tructions - S V 50
F or owners of the S V 50, please follow the instructions below when replacing the internal lamp.
!
F or owners of the S V 50, please follow the instructions below when replacing the internal
lamp.
Warnings for replacing the internal lamp
1. Warning: T urn off the unit and unplug it before replacing the lamp.
2. Warning: Do not attempt to replace the lamp immediately after the display is turned off. T he high
temperature of the lamp could cause serious burns. Allow the lamp to cool down at leas t two hours
after turning off the display before changing the lamp.
3. Warning: Do not remove the lamp except to replace it. C areless treatment can cause injury or fire.
4. Warning: When replacing the lamp, make sure that no screws or other foreign metal objects fall into
the display's interior as such items may cause fire or electrical shock.
5. Warning: Do not touch the lamp element as it may break and caus e serious burns or injuries.
Loosen the three screws on the lamp unit and
pull the lamp module out. (Note: These screws
may be loosened but cannot be removed from
the unit.)
3
2
1
4
R eplace the protective cover and tighten
the screws.
5
R eplace the front decorative cover.
6
R emove the front decorative cover
Unscrew and remove the lamp module's
protective cover.