Filter
Top Products
- 8 - EN
ANT.
29 30
17 DISPLAY button– Hit to display the counter or
the current channel number and current time on
the TV screen. (Refer to page 25.)
18 STOP button– Hit to stop the tape motion.
L
button– (Remote control)
•
Hit to select a mode or figure from
the setting menu.
19 RECORD button– Hit to start manual recording.
20 SPEED button– Hit to choose the desired record-
ing speed:SP/SLP.
21 T- PROG. CLEAR button– Hit to cancel a setting
of timer program. (Refer to page 24.)
COUNTER RESET button– Hit to reset counter to
0:00:00.
22 GAME button– Hit to set the Game mode and
external input mode at the same time. (Refer to
page 11.)
23 TIME SEARCH button– Hit to activate Time
Search mode.
24 PAUSE/STILL F button– Hit to temporarily stop
the tape during the recording or to view a still pic-
ture during playback.
25 MUTE button– Hit to mute the sound. Hit it again
to restore the sound.
26 CHANNEL RETURN button– Hit to go back to
the previously viewed channel. Hit again to return
to the present channel.
27 EJECT A button– Hit in the stop mode to remove
the cassette from the unit.
28 WAKE-UP/SLEEP button– Sets the Wake up or
Sleep Timer. (Refer to page 11 or 12.)
29 Power cord– Connect to a standard AC outlet
(120V/60Hz). (Refer to page 10.)
30 ANT(ENNA). jack– Connect to an antenna, cable
system or satellite system. (Refer to page 9.)
INSTALLING THE BATTERIES
1)Open the battery compartment cover by pressing
the cover on the remote unit in the direction of the
arrow.
2)Insert 2 “AA” penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3)Replace the cover.
[BATTERY PRECAUTIONS]
•
Be sure to follow the correct polarity as indicated
in the battery compartment. Reversed batteries
may cause damage to the device.
•
Do not mix different types of batteries together
(e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
•
If the device is not to be used for a long period of
time, remove the batteries to prevent damage or
injury from possible battery leakage.
•
Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture.
- REAR VIEW -