Filter
Top Products
EN - 10 -
USING FRONT A/V INPUT JACKS
When you watch a program recorded on another source (VCR or video camera), use the
AUDIO/VIDEO input jacks on the front of the unit.
Connect the Audio/Video output jacks of another source to the AUDIO and VIDEO jacks
of this unit.
Then use [CHANNEL
KK
/
LL
] until “AUX” appears on the screen.
VIDEO AUDIO POWER VOLUME CHANNEL STOP/EJECT REW PLAY F.FWD REC/OTR EARPHONE
VIDEO AUDIO
ex.
VCR or video camera
, etc.
[Front of the unit]
To the Audio output jack
To the Video output jack
AUX
(OUT)
(IN)
(OUT)
(IN)
TV OPERATION AND SETTINGS
WATCHING A TV PROGRAM
1 Plug in the power cord
After antenna or cable connection is com-
pleted, connect the power cord into a stan-
dard AC outlet.
NOTE:
•
If any digits appear in the corner of the
screen, press [POWER] without unplugging the
power cord.
2 Turn on the unit
Press [POWER] to turn on the unit.
3 Select the channel number
Use [CHANNEL
KK
/
LL
] or the Number buttons to
select your desired channel number.
Note for using the Number buttons:
¡You must precede single-digit channel numbers
with a zero (for example: 02, 03, 04 and so on).
¡When selecting cable channels which are higher
than 99, press [+100] first, then enter the last two
digits. (Example: to select channel 125, first press
[+100] then press [2] and [5].)
4 Adjust sound
Use [VOLUME
XX
/
YY
] to adjust the
volume.
Press
[MUTE] to instantly mute
the sound.
Press it again to restore the previous sound level.
TO WATCH CABLE OR SATELLITE
CHANNEL
•
If the unit is connected to a cable box or satellite
box, use [CHANNEL
KK
/
LL
] to select CH3 or CH4
according to the output channel setting of the
device and select desired channel on that device.
TO WATCH EXTERNAL INPUT
•
When an external equipment is connected to the
front AUDIO/VIDEO input jacks, use [CHAN-
NEL
KK
/
LL
] repeatedly until “AUX” appears on
the screen.
VOLUME 20
C C C C C C C C C C C C
Audio cable
(commercially available)
Video cable (commercially available)
T5518UU.NEW.QX4 06.4.6 10:22 AM Page 10