Filter
Top Products
- 46 - EN
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked
possibilities. Before arranging for service, check these items. It could save your time and money.
TV/VCR Mode
TROUBLESHOOTING GUIDE
PROBLEM CORRECTIVE ACTION
No picture or sound
•
Make sure the AC cord is connected to an AC outlet.
•
Check antenna connection.
•
Hit [SELECT] to select TV mode.
Then try other TV feature.
•
Let the unit program its tuner memory.
No picture or poor picture on the
•
Adjust direction or replace antenna.
unit
•
Adjust picture controls.
•
Check for broken pin of the antenna cable.
No sound or poor sound
•
Adjust volume control on remote control or main unit.
•
Hit [MUTE] to restore sound.
Bars On Screen
•
If outside antenna is being used, check for broken wire.
•
Check for local interference.
Picture Distorted or Blurred
•
Try a new channel, if OK, then possible station trouble.
•
If outside antenna is being used, check for broken wire.
Picture Rolls Vertically
•
Try a new channel, if OK, then possible station trouble.
Lines or Streaks in Picture
•
If outside antenna is being used, check for broken wire.
•
Check for local interference.
No Color
•
Try a new channel, if OK, then possible station trouble.
•
Is antenna connected to jack on the back of the set?
•
If outside antenna is being used, check for broken wire.
•
Adjust “COLOR” control.
Poor Reception on Some Channels
•
Try a new channel, if OK, then possible station trouble.
Ghosts in Picture
•
Is antenna connected to jack on the back of the set?
•
If outside antenna is being used, check for broken wire.
•
Check for local interference.
Weak Picture
•
Try a new channel, if OK, then possible station trouble.
•
Is antenna connected to jack on the back of the set?
•
If outside antenna is being used, check for broken wire.
•
Adjust “CONTRAST” & “BRIGHT” control.
Sound OK, Picture Poor
•
Try a new channel, if OK, then possible station trouble.
•
Is antenna connected to jack on the back of the set?
•
If outside antenna is being used, check for broken wire.
•
Check for local interference.
•
Adjust “CONTRAST” & “BRIGHT” control.
If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit, con-
sulting the following checklist.
PROBLEM CORRECTIVE ACTION
No power
•
Make sure the power plug is connected to an AC outlet.
•
Make sure the power is turned on.
No operation by infrared remote
•
Check if the power plug is connected to an AC outlet.
control
•
Check the batteries in the remote control.
•
Aim the remote control directly at the remote sensor. If necessary,
remove all the obstacles between the sensor and the remote control.
•
You have to be within 23 feet of the unit.
•
Check if the correct mode is selected. If not switch the mode by
hitting [SELECT], whichever you need.