Filter
Top Products
– 5 – EN
You may set the VCR to start recording while you are away.You
can set eight programs to record on specific days, daily or week-
ly within a 1 year period.
1
Insert a tape with its safety tab into the VCR.
2
Select main menu by pressing [MENU].
3
Select "TIMER PROGRAMMING" by pressing [PLAY] or
[STOP]. Then, press [F.FWD].
• If you have not yet set the clock, "CLOCK SET" appears. If
so, continue with the step [3] in "CLOCK SET UP" section.
Then, set the timer recording.
4
Set the timer.
It may be unlawful to record play back copyrighted material with-
out the consent of the copyright owner.
Accidental erasure prevention
To prevent accidental recording on a recorded
cassette, remove its record safety tab.To
record on it later, cover the hole with cello-
phane tape.
Before recording, make sure:
•
The desired channel is selected by pressing [Number] on
the remote control or the [CHANNEL ]. (If you con-
nected the VCR to a cable box or satellite box as in "VCR
to TV Connection" on page 3, select the VCR to channel
3 or 4 the same channel as the RF output channel of the
VCR. Then, select the channel you want to record at the
cable box or satellite box. In this case, you can ONL
Y
record and view the SAME channel. )
• There is a tape with its safety tab into the VCR.
• The desired recording speed is selected in SP(standard play) or
SLP(super long play) mode by pressing [SPEED] on the remote
control.
• TV STEREO or SAP is selected.
(
)
Record safety tab
Type of tape T60 T120 T160
SP mode 1hour 2hours 2-2/3hours
SLP mode 3hour 6hour 8hour
Tape Speed Recording/Playback Time
1
Begin the recording by pressing [RECORD].
• To temporarily stop recording or resume it, press
[PAUSE/STILL]. After the VCR has been in Pause mode for
5 minutes, it will stop automatically to protect the tape and
the video head from damage.
2
Press [STOP] when recording is completed.
This feature allows you to set the recording length simply by
pressing [REC/OTR] on the VCR.
1
Begin OTR by pressing [REC/OTR] on the VCR repeat-
edly until the desired recording length appears.
RECORDING FUNCTION
Viewing and Recording the Same Program
OTR (One Touch Recording)
TIMER RECORDING
Select once, daily or weekly recording
Set the tape speed
Set the channel number
Set the end time
Set the start time
Set the date
Set the program number (1~8)
Press [PLAY] or [STOP] repeatedly for the desired channel number.
Then, press [F.FWD].
If you connected the VCR to a cable box or satellite box as in "Connect
VCR to TV" on page 3, select the VCR to channel 3 or 4 the same channel
as RF output channel of the VCR.
Then, select the channel you want to record at the cable box or satellite box.
Leave the cable box or satellite box on for timer recording.
Press [PLAY] or [STOP] repeatedly for the
desired
tape speed.
Then, press [F.FWD].
Program number which is not set up flashes.
Press [PLAY] or [STOP] repeatedly for the
desired program number.Then, press [F.FWD].
First, press [PLAY] or [STOP] for the month. Then, press [F.FWD].
Next, press [PLAY] or [STOP] for the day. Then, press [F.FWD].
First, press [PLAY] or [STOP] for the hour. Then, press [F.FWD].
Next, press [PLAY] or [STOP] for the minute. Then, press [F.FWD]
.
And then, press [PLAY] or [STOP] for AM or PM. Then, press [F.FWD]
.
Follow the instructions of "Set the start time" to set the end time.
For weekly:
Press [PLAY] or [STOP] to point to
"WEEKLY".
Then, press [F.FWD]
.
For daily (Monday~Friday):
Press [PLAY] or
[STOP] to point to "DAILY".
PROGRAM NUMBER 4
ONCE
DAILY
WEEKLY
ONE TIME PROGRAM
PROGRAM NUMBER 4
DATE 05/12 MON
START TIME 07:30 PM
END TIME 08:30 PM
CHANNEL 16
REC SPEED SP
SP
SLP
PROGRAM NUMBER 4
DATE - - / - -
START TIME - - : - - - -
END TIME - - : - - - -
CHANNEL - -
REC SPEED - -
For once:
Press [PLAY] or [STOP] to point to "ONCE".
• To go back one step, press [REW].
5
To set another program, repeat step [4]. To exit, press
[C.RESET/EXIT].
6
Press [POWER] to set the timer. The TIMER indicator on
the VCR comes on. TIMER RECORDING WILL NOT BE
ACTIVATED UNLESS YOU TURN THE VCR OFF.
An index mark will be assigned at the beginning of each record-
ings you make. You may skip to a specific marked point by fol-
lowing the steps below.
1
P
ress [SEARCH-MODE] so that the Index Search menu
appears.
2
Enter the number of recordings you
wish to skip by pressing [PLAY] or
[STOP] within 30 seconds.
3
Press [F.FWD] or [REW] to start index search. If you
want to go in the forward direction, press [F.FWD]. If you
want to go in the reverse direction, press [REW].
•
After index search, the VCR will play the tape automati-
cally.
This feature allows you to go to a specific point on a tape by
entering the exact amount of time you wish to skip in order to
reach the point.
1
Press [SEARCH-MODE] so that the Time Search menu
appears.
2
Enter your desired time to skip by
pressing [PLAY] or [STOP] within 30 seconds.
3
Press [F.FWD] or [REW] to start time search. If you want
to go in the forward direction, press [F.FWD]. If you want
to go in the reverse direction, press [REW].
•
After time search, the VCR will play the tape automati-
cally.
Time Search
TIME SEARCH
2 : 50
INDEX SEARCH
03
Index Search
REC OTR(0:30) OTR(1:00).....
(Normal recording)
OTR(8:00) OTR(7:30)
HD450(EN).QX33 02.11.28 11:53 AM Page 5