Sylvania D6313CCB TV VCR Combo User Manual

Open as PDF

of 34

- 27 - EN

0B19

To shift the time schedule of an automatic timer

recording.

1)Press the POWER button.

2)Repeat step [1] on page 26.

3)Press the RECORD button and select the desired

program using the PLAY/Kor STOP/Lbutton.

4)Press the RECORD button again.

Each additional push will shift forward the

begin/end time for recording by 10 minutes. When

the recording is already in progress, each additional

push will shift forward the end time only. If you

want to cancel while setting, press the

PAUSE/STILL button on the remote control. The

recording time returns to the original time.

NOTE: When you shift forward the time schedule

during recording, the recording speed will automati-

cally be set to the SLP mode.

5)Press the F.FWD/Bor REW/sbutton to exit the

setting menu. Then press the MENU button on the

remote control to return to original mode.

TO CORRECT A PROGRAM

•

While setting a program; press the REW/sbutton

to go back one step and enter the correct numbers

using the PLAY/Kor STOP/Lbutton.

•

After setting a program;

1)Press the POWER button.

2)Repeat steps [1] - [2] on page 26.

3)Press the F.FWD/Bbutton (or press the REW/s

button to go back one step) until the part you

want to correct begins flashing, then make the

changes pressing the PLAY/Kor STOP/Lbutton.

4)Press the POWER button to set automatic timer

recording.

TO CANCEL AN AUTOMATIC TIMER

RECORDING

•

After setting a program;

1)Press the POWER button.

2)Repeat steps [1] ~ [2] on page 26 and select a

program you want to cancel.

3)Press the T-PROG. CLEAR button.

4)Press the MENU button on the remote control to

return to TV mode.

•

While recording is in progress;

1)Press POWER button.

2)Press the STOP/EJECT button on the TV/VCR.

Set beginning hour