Filter
Top Products
VCR FUNCTIONS
–
12
–
EN
POWER
REW F.FWDSTOP/EJECT PLAY REC/OTR
VIDEO
AUDIO
POWER OPEN/CLOSE
DISPLAY VCR DVD MODE
TRACKING
PLAY
STOP
REC/OTR SKIP PAUSE
SPEED T-SET
123
456
789
0
+10
CLEAR/
C. RESET
INPUT
SELECT
2
Press [B] to “AUTO REPEAT” to set “ON” or “OFF”.
Press [SETUP] to exit.
- M E N U -
TIMER PROGRAMMING
SATELLITE LINK
B AUTO REPEAT [ON]
CLOCK SET
LANGUAGE SELECT
Note:
• The auto repeat function can also be set “ON” or “OFF” by pressing [REPEAT] on the remote control.
• To cancel auto repeat function, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [SETUP] to exit.
• The auto repeat playback will start automatically if you select “AUTO REPEAT” to “ON” in the stop mode.
1
Press [SETUP], and choose “AUTO REPEAT”.
- M E N U -
TIMER PROGRAMMING
SATELLITE LINK
B AUTO REPEAT [OFF]
CLOCK SET
LANGUAGE SELECT
SETUP
or
Auto Repeat
When “AUTO REPEAT“ is set to “ON“, the cassette tape will automatically rewind and start over when it reaches the end.
This will continue until auto repeat function is turned off.
VCR
VCR
1
Press [SETUP]. Select “TIMER PROGRAMMING”.
SETUP
TIMER PROGRAMMING
PROG 12345678
DATE
START TIME
END TIME
L1/L2
REC SPEED
- M E N U -
B TIMER PROGRAMMING
SATELLITE LINK
AUTO REPEAT [OFF]
CLOCK SET
LANGUAGE SELECT
Available program number flashes.
2
Select an empty program number.
Then press [B] to go to next step.
PROGRAM NUMBER 1
DATE – – / – –
START TIME – – : – – – –
END TIME – – : – – – –
L1/L2 – –
REC SPEED – –
or
1
Insert a recordable
cassette tape.
2
Press [INPUT SELECT] until “L1” or
“L2” is displayed on the TV screen.
Select “L1” to activate rear input jacks.
Select “L2” to activate front input jacks.
3
Press [SPEED] to select the desired tape speed.
4
Press [REC/OTR] until desired recording time is selected.
5
Press [STOP C] to
stop recording.
6
Press [OPEN/CLOSE A] to eject the
recorded cassette tape.
Recording
You CANNOT dub a DVD to a video cassette tape.
To stop recording temporarily (Pause mode)
Press [PAUSE F].
• During the recording in pause mode, 5
C
marks appear on the
TV screen. Each
C
mark represents 1 minute.
• Press it again to resume recording.
• Pause mode will be automatically canceled after 5 minutes to
prevent damage to the cassette tape and the video head.
Note:
• Do not change the external tuner’s channel while you are recording.
You CANNOT watch one channel and record another at the same time.
• Connect your external tuner to the L1 (rear panel) jacks of the unit.
Connect camcorders and other such devices to the L2 (front panel)
jacks. Refer to page 7, 9.
This unit has no tuner system so it cannot receive TV broadcasts without external
tuner or such devices.
Timer Recording
VCR
VCR
Accidental Erasure Prevention
To prevent accidental recording, remove erase-
protection tab of the cassette tape. To record
on it later, cover the hole with adhesive tape.
Recording & One-touch Timer Recording (OTR)
Tape speed Recording / playback time
Type of tape
T60 T120 T160
SP mode 1hour 2hours 2-2/3hours
SLP mode 3hours 6hours 8hours
Note:
• You can also set to external tuner. Refer to “Satellite Link” on page 14.
TV
external tuner
this unit
6
3
2
5
4
1465
REC
SP
STOP
OPEN/CLOSE
SPEED
REC/OTR
VCR
VCR
erase-
p
rotection tab
INPUT
SELECT
REC OTR (0:30) OTR (1:00).....
(normal recording)
OTR (8:00) OTR (7:30)
See note on the right.
• Insert a recordable cassette tape.
• Make sure to turn on the external
tuner.