Filter
Top Products
CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL
INPUT JACKS, MD DECK OR DAT DECK
Use audio coaxial digital cables (commercially available) for the audio connections.
Notes
●
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound
by an MD or DAT deck.
●
Be sure to turn off the power to all components in the system before connecting another component.
●
Refer to the Owner’s Manuals for the components to be connected to the DVD player.
●
Set DOLBY DIGITAL and DTS to OFF for audio output in the setup mode. Playing a DVD using incorrect
settings may generate noise distortion, and may also damage the speakers.
●
When DOLBY DIGITAL is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and you
select the audio source in a 5.1 channel Dolby Digital surround format, the audio will be muted.
DIGITAL AUDIO OUT
PCM / BITSTREAM
AUDIO OUTVIDEO OUTS-VIDEO OUT
COAXIAL
RL
1
2
To COAXIAL DIGITAL
AUDIO INPUT jack
A/V-compatible
or
wide screen TV
Amplifier equipped with digital
input jacks, MD deck,
DAT deck, etc.
To VIDEO INPUT jack
or
To S-VIDEO
INPUT jack
To VIDEO OUT jack
To S-VIDEO OUT jack
To COAXIAL DIGITAL
AUDIO OUT jack
[Fig. 4]
0D05
E7800-01
- 11 - EN