Sylvania SRC2113 TV VCR Combo User Manual


 
- 21 - EN
01A11
3 Begin OTR
Press the REC/OTR button on the
TV/VCR as many times as needed.
The recording length will be deter-
mined by the number of times you
press the REC/OTR button. Each
additional push will increase the recording time by
30 minutes. It is set up to 8 hours.
OTR(2 : 30)
SP
Avoid overlap of programs ...
There is a chance that a program will not be record-
ed. When programs overlap:
The program with the earliest start time will record
first.
Once the earliest program finishes recording, the
overlapping programs will record in the order of
the program number.
The illustration below demonstrates the sequence
of recording.
1 Select TIMER PROGRAMMING
Press the MENU button on the remote control.
Confirm “TIMER PROGRAM-
MING” is pointed to by pressing
the PLAY/K button.
Press the F.FWD/B button.
If you have not yet set the clock,
“MANUAL CLOCK SET” appears. If so, follow
stops [3] to [8] on page 11. Then set the timer
recording.
2 Select your desired program position (1~8)
Press the PLAY/K or STOP/L but-
ton to select the desired program
position.
Then, press the F.FWD/B button.
3 Set the channel number
Press the PLAY/K or STOP/L but-
ton until the desired channel num-
ber appears.
(Example: CH61)
Then, press the F.FWD/B button.
Remember:
If your TV/VCR is connected to a cable or satellite
box, you must set the TV/VCR to channel 3 or 4 to
match the output channel of the box.
4 Select once, every day or weekly recording
For once recording :
Press the PLAY/K (up) button
until the desired date appears.
(Example: “7/06” for July 6th).
Then, press the F.FWD/B but-
ton.
For every day recording : To record a TV program at
TIMER RECORDING
9:00AM 10:00AM 12:00PM
Program 1
10:00AM-11:00AM
Program 2
9:00AM-10:00AM
Program 3
9:30AM-12:00PM
11:00AM
Recording Sequence
*Recording period is SHADED
You may set the TV/VCR to start and end a record-
ing while you are away. You can set 8 programs to
record on specific days, daily or weekly within a 1
year period.
In the example below, the timer is being set to record:
DATE: July 6th, 2001
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL: CH61
TAPE SPEED: SP
Make sure ...
If your TV/VCR is connected to a cable or satellite
box, you must set the TV/VCR to channel 3 or 4
to match the output channel of the box.
Clock is set to the correct time and date before set-
ting the timer.
TV/VCR power is turned on to program it.
To insert a cassette tape with its erase prevention
tab in place. (If necessary, rewind or fast forward
the tape to the point at which you want to begin
recording.)
To set the channel you want to record
M E N U
B TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USERS SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
TIMER PROGRAMMING
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
TIMER PROGRAMMING
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
61 -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
TIMER PROGRAMMING
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
B
61 7/06 FRI -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
Push(es) Display Recording length
1 push (continuous recording)
2 pushes 0:30 30 minutes
3 pushes 1:00 60 minutes
4 pushes 1:30 90 minutes
17 pushes 8:00 480 minutes
T5214.QX3 01.2.21 6:56 PM Page 21