Sylvania SRT199V CRT Television User Manual


 
ANTENNA/CABLE CONNECTIONS
UHF/VHF Rod
Antenna
(Not suppli
VHF
Ain¢l]lla
(NotAntennaUHFd__supplie (Not supplied)
ANT IN
VHotFs/_juHpFIieCd_mbiner I I _ I
VHF/UHF _ ,_J
('ombination Antenna
/Not '_uppliedl
*Some cable TV systems use scram-
bled signals and require a special con-
verier to receive these channels.
Consult your local cable company.
CATV Box *
or Satellite Box
(Not supplied)
OUT _IN From Cable System
t
or Satellite Antenna
75-ohm
75-ohm Coaxial Cable
Coaxial Cable
From Cable System
Received
C6F;_d
Entered
tlS _NBPOS .....
Scanned
Batch #
FCC WAI_NING - This equip-
ment may generate or use radio
frequency energy. Changes or
modifications to this equipment
may cause harmful interference
unless the modifications are
expressly approved in the
instruction manual, The user
could lose the authority to oper-
ate this equipment if an unau-
thorized change or modification
is made.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40 ot
ofthecableNECentrythatprovideSaspractical.guidelines for proper grounding and, in particular, specifies that the
cable ground shall be connected to the grounding system of the building as close to the point
CLOSED CAPTION
This TV can receive C I and C2 of Caption and Text.
lllll II]] [_'l I
( I )Characters can he displayed on the TV screen when the received broadcast signal contains the
Caption Signals.
(2)Paint-on mode: Displays input characters on the screen immediately.
Pop-oil mode: Once characters are stored in memory, it is displayed all at once.
Roll-lip mode: Displays the characters continuously by scrolling (max. 4 lines)
Nolo: If the CAPTION CI or C2 is selected but the caption signal is not included, characters will
not be displayed.
I _1L'i111
(l)Displays the text on the screen by scrolling (max. 7 lines)
(2)lf the received broadcast signal does not contain the caption or text signal, no change will
occur.
Notes:
(I)When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a
VCR's video output channel (CH3 or CH4), your TV may not display the correct caption or
text.
(2)Captions and texts may not match the TV voice exactly.
(3) Inted_rence may cause the closed caption system not to function properly.
(4)The caption or text characters will not be displayed while the menu display or function's dis
play is shown.
(5)If you see this screen!!
I..1
If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To
clear screen, select CAPTION C I, C2 or CAPTION [OFF].