Palsonic 3420B CRT Television User Manual


 
To watch a TV programme
The setting of colour system
COLOR AUTO
1. Press the SYS button, the colour system will be displayed on the
screen.
2. If the colour is abnormal, press the or button to select the
proper colour system. Every timeyou press the or button, the
colour system will change in the sequence below.
Now you can watch the broadcasting TV program at the preset channel.
Channel selection
You can watch TV programmes being broadcast on the preset channels.
COLOR PAL
You can select your desired TV program by one of the following methods.
Using the direct select buttons
To select a one-digit position number, press the -/-- button to display
"-" and 0-9 to select a number. (0-9)
30
press 0-9 to select a number. (10-99)
Using the CH buttons
Press
CH
to
select lower position numbers;
CH
to select higher ones.
10
Tuning in (continued)
OPERATION
To select a two-digit position number, press -/-- to display "--" and
1
3.58NTSC
4.43NTSCPALAUTO