Filter
Top Products
OPERATION
To skip a position number
After presetting the channels, you can skip unnecessary position numbers so that only the channels
you want to watch are selected.
1. Enter into the POS. MEMORY menu, select and highlight
POSITION, then select the unwanted program number with the
or button.
2. Press the or button to move the cursor to "SKIP". Press the
After completion of channel preset, the position number will then
be skipped when you select channels with the CH button.
If you want to skip other unwanted channels, repeat step 1 above to
change the channel number.
or button to select "SKIP ON"
To restore a skipped position number
Select the position number you want to restore. Press the or button to move the cursor to
"SKIP". Press the or button to select "SKIP OFF".
MFT (Manual Fine Tuning)
When sound and picture’s effect of a channel is poor (for example: one or two CATV channel’s
sound and picture are not standard), you can correct them by making use of Manual Fine Tuning).
1. Enter into POS.MEMORY menu, select the channel you want to
manually
fine tune.
2. Press the or button to select and highlight MFT, then press
the or button, the channel begins fine tuning until the
optimum picture and sound is achieved.
Note: if some channel’s colour is abnormal, it may be that the setting of
the colour system is wrong, please do adjustment according to The
setting of colour to set the colour system.
3. To exit the menu, press the MENU button repeatedly.
9
Tuning in (continued)
To skip unneccessary position numbers and MFT (Manual Fine Tuning)
POS.MEMORY
POSITION 01
BAND VHFL
SKIP OFF
SEARCH DOWN
MFT DOWN
AUTO MEMORY
!!!!!!......
POS.MEMORY
POSITION 01
BAND VHFL
SKIP OFF
SEARCH DOWN
MFT DOWN
AUTO MEMORY
!!!!!!......
POS.MEMORY
POSITION 01
BAND VHFL
SKIP OFF
SEARCH DOWN
MFT DOWN
AUTO MEMORY
!!!!!!......
POS.MEMORY
POSITION 01
BAND VHFL
SKIP OFF
SEARCH DOWN
MFT DOWN
AUTO MEMORY
!!!!!!......