Filter
Top Products
3
2
1
1
2
3
Setting Time On
Press MENU button repeatedly to enter into
Clock menu page.
Press CH- button repeatedly to select Time On
item.
Press VOL+ or VOL- button to set On time.
After you finish setting Time On item, press the STANDBY
button on the remote control. Then the TV set auto turns on
when your preset time elapses.
Notes:
The Alarm Channel item is available only after you finish setting
Time On item.
Setting Alarm Channel
Press MENU button repeatedly to enter into
Clock menu page.
Press CH- button repeatedly to select Alarm
Channel item.
Press VOL+ or VOL-
button to select a channel
number.
When the preset On Time elapses,
the set auto turns on and goes to
the channel set on the Alarm
Channel item.
Notes:
Clock
Sleep
Timer
Time Off
Time On
Alarm Channel 99
30
00 : 10
00: 30
07: 00
1.
When you adjust time by VOL+ or VOL- button, the increasing/
decreasing step of time is 1 minute in every press. If you press and
hold the button for more than 1 second, the step of time is 1 hour.
2. Once the functions of Time On or Time Off fulfil, you need to set
the On Time or Off Time again if you want to use this function next
time.
3.
After you finish setting Time Off item, if the set auto goes to
STANDBY because there is no signal input for a continuous 15
minutes, or if you turn off manually, then the preset Off Time will be
cancelled. As the same way, turn on the set in advance will cancel
the Time On and Alarm Channel settings.
4.
Once you turn off the set by press the Power Switch, all settings
in the Clock menu page will be cancelled in next time's turning on.
19
!
!
Time On/ Alarm Channel