Filter
Top Products
5
3
2
1
7
DSP
AV
9
8
6
0
4
SCAN
SLP CAL GAME
P.M
Manual search
Tuning In
Auto search/Manual search
13
Operations
Auto search
Access PRESET menu.
Press CH+/- buttons to select AUTO.
Press VOL+/- buttons and the TV set starts
Auto channel preset. All active channels will be
preset and stored into the memory automatically
.
After presetting, the TV will display the first
channel.
During the process of Auto channel preset, pressing the MENU button
or the VOL+/- buttons will stop the process.
Note: Before you start Auto Search, we recommend you to set
a proper Sound System according to your local area.
If desired channel can not be preset by Auto search or if you would like
to preset channels to specific position numbers one by one, use manual
search function.
Firstly please select a channel number with
digit buttons or CH+/- buttons .You can also
access PRESET menu, select CHANNEL item
and adjust with VOL+/- button manually to select
the desired channel number (from 0~255).
In PRESET menu, select MANUAL item.
Press VOL+ button, the set searches towards
higher frequency. Press VOL- button, the set
searches towards lower frequency. The search
stops when a program is found and this
program will be stored in the specified position
number.
You can use band selection to quicken
search process. Select BAND item and press
VOL+/- buttons. The band switches among
VLF, VHF and UHF. Then select MANUAL
item and press VOL+/- buttons to start manual
search.
Repeat the above steps if you want to store another program in other
position number.
Press MENU button.
Press VOL+/- buttons to select PRESET menu.
Press CH- button to access PRESET menu.
1
2
3
VHF
0
1
ON
BAND
CHANNEL
EXCHANGE
TARGET
SKIP
P
R
E
S
E
T
AUTO
BG
COLORSYS
SOUNDSYS
AUTO
FINE
MANUAL
P
R
E
S
E
T
AUTO
BG
COLORSYS
SOUNDSYS
AUTO
FINE
MANUAL
P
R
E
S
E
T
UHF
0
1
ON
BAND
CHANNEL
EXCHANGE
TARGET
SKIP
P
R
E
S
E
T
Digit
CH+
CH-
VOL-
VOL+
MENU