Filter
Top Products
After presetting the channel you can skip unnecessary position numbers so that only the channels you
want to watch are selected with POS+/- button.
Enter into PRESET menu, select the program number
you want to fine-tune.
Tuning in (continued)
OPERATION
Press the POS+/- button to select "SKIP". Press the
VOL+/- button to select "SKIP ON".
Thus, after exiting the menu, the position number will
then be skipped when you select programs with the
POS+/- button.
If you want to skip other unwanted programs, repeat
step 1 above to change the program number.
To skip a position number
Enter into the PRESET menu, press the POS+/-
button to select POS., then select the unwanted
program number withthe VOL+/- button.
Press the POS+/- button to select FINE, then press and
hold the VOL+ or VOL- button, the channel begins
fine tuning until the optimum picture and sound is
achieved. (Press VOL+ button to fine-tune upward,
while VOL- button to fine-tune downward. The AFT
function will be set to OFF mode automatically)
Note: if some channel’s colour or sound is abnormal, it may be that the setting of the colour or the
sound system is wrong, please do adjustment according to The setting of colour and sound system (on
page 10) to set the proper colour and sound system.
To skip unnecessary position numbers and MFT (Manual Fine Tuning)
To restore skip a position number
MFT (Manual Fine Tuning)
Enter into the PRESET menu, Select the position number you want to restore. Press the POS+/- button
to select "SKIP". Press the VOL+/- button to select "SKIP OFF".
When picture and sound's effect of a channel is poor (for example: one or two CATV channel's picture
and sound are not standard), you can correct them by making use of Manual Fine Tuning (FINE).
9
PRESET
24
SKIP OFF
BAND UHF
FINE
AFT ON
SEARCH
ASM
S-RCV OFF
POS
PRESET
24
SKIP ON
BAND UHF
FINE
AFT ON
SEARCH
ASM
S-RCV OFF
POS
PRESET
25
SKIP OFF
BAND UHF
FINE
AFT ON
SEARCH
ASM
S-RCV OFF
POS
(or OFF)
PRESET
25
SKIP OFF
BAND UHF
FINE
AFT ON
SEARCH
ASM
S-RCV OFF
POS
1.
2.
Note: you can select the skipped channel by pressing the direct channel
select buttons, and the position number displayed on the screen is in red.
1.
2.
3. To exit the menu, press the RECALL button.