Filter
Top Products
Press CH to select lower position numbers; CH to select higher ones.
Using the CH buttons
The setting of colour system & channel selection
OPERATION
COLOR AUTO
1. Press the SYS button, the colour system will be displayed on the
screen.
If the colour is abnormal, press the or button to select the
proper colour system. Every time you press the or button,
the colour system will change in the sequence below.
AUTO
Now you can watch the broadcasting TV program at the preset channel.
10
The setting of colour system
PAL
4.43NTSC
3.58NTSC
COLOR PAL
2.
Channel Selection
You can select your desired TV program by one of the following methods.
Using the direct select buttons
To select a one-digit position number, press the -/- - button to display
"-" and 0~9 to select a number. (0~9)
To select a two-digit position number, press -/- - to display "-" and
press 0~9 to select number (10~99)
.
.
1
30