Filter
Top Products
14
3. SLEEP timer
Using the SLEEP button allows you to have the appliance automatically turned off after a preset
time (the time range will be as long as 120 minutes) , and set the appliance to standby mode. At
every press of the button the setting time will be decreased by 30 minutes.
When the remaining time is 5 minutes left, it will be displayed once every 2 minutes for
4 seconds
When the SLEEP timer is functioning, if you press SLEEP button again, the TV will display the
remaining time. If the power is switched off, the SLEEP timer will be cancelled. You must set it
again if wanted.
4. TV/AV selection
Press the TV/AV button on the set or AV button on the remote controller to select TV or AV
mode.
When the TV is working at RF receiving mode, press AV button the set will be switched to
AV1, the screen displays AV1 and colour system; Press the button again and the set will be
switched to AV2, the screen displays AV2 and colour system. Press the button once more, the set
will be switched to TV mode and the screen displays current TV channel.
SLEEP OFF SLEEP 120
SLEEP 30
Press SLEEP
Press SLEEP Press SLEEP
AUTO
PAL
PAL(RF/VIDEO)
NTSC 3.58 (VIDEO)
PAL(RF/VIDEO)
PAL-60(RF/VIDEO)
4.43MHz 50Hz
3.58MHz 60Hz
50Hz
4.43MHz
60 Hz
N358
NTSC3.58 (VIDEO) 3.58MHz
N443
NTSC4.43(VIDEO)
4.43MHz
COLOR SYSTEM
COLOR
SUB-CARRIER
VERTICAL
FREQUENCY
60 Hz
60 Hz