Filter
Top Products
.
.
.
.
.
.
.
.
.
.
.
.
OTHERS
Troubleshooting Guide
Before calling service personnel, please check the following chart for a possible cause to the
trouble you are experiencing.
Spots appear on the screen
Stripes appear on the screen
Double images or "ghosts"
Snowy picture
The remote controller does not work
TV cabinet creaks
Be sure the power cord is plugged in.
Contrast, colour, tint are not correctly
adjusted
Possible interferences of automobiles,
motorcycle, trolley bus, neon lamps, etc.
Possible interference of electronic
interference from another TV set, a
computer, an electronics game machine, a
broadcast station, etc.
This may be caused by reflections from
nearby mountains or buildings.
Check the antenna direction.
It is possible that the aerial “lead-in” is
damaged or comes off.
Check the antenna direction
The batteries may be worn out.
The batteries may be installed with their
polarity reversed.
Even if the picture or the sound is normal,
changes in the room temperature
sometimes make the TV cabinet expand or
contract, making a noise. This does not
indicate a malfunction.
X~Z+2, S1~S41
PAL-B/G
Specifications
Power supply:
Power consumption:
Dimensions (mm):
Weight (kg):
CRT:
TV system & channel range
System VHF
UHF
AC 240V, 50Hz
140 W
775 (W) x 585 (H) x 505 (D)
43
68cm
CATV
2-12 21-69
Colour system:
Sound output:
Accessory:
* Note: Design and specifications are subject to change without notice.
PAL-BG, NTSC 3.58/4.43 (AV)
5W + 5W
one remote controller
Poor colour, poor tint
No power, red indicator is not lit up
Symptoms
Check the following items
22
Unevenness in colour in some parts of
the screen.
When the set is switched on, do not shift or
move the set around. Sometimes it may
develop an unevenness in colour in some
parts of the screen. This can be eliminated
by switching off the set with the POWER
switch and wait for 10 minutes before
switching on again.
.