Palsonic 6840TS CRT Television User Manual


 
Don't overload wall outlets; extension cords, or
integral convenience receptacles as this can result
in a risk of fire or electric shock.
3
This TV set can operate on a power of ~240V, 50Hz. You must not use a power
supply of any other type.
Do not cover the ventilating hole in the cabinet
Keep a space of more than 10cm from the walls to the
TV set to ensure adequate ventilation.
If the power cord or the plug is damaged contact a
qualified service department for service.
When the TV set is to be left unattended for a long
period of time, turn off the power supply and remove
the plug from the wall outlet.
Don't try to push anything into the cabinet or place
any vessel with water on the TV set.
Auto degaussing:
When you remove the TV set to another place or when other electronic machines near the set are
working, the colour TV set will be magnetised. The colour of the TV will be abnormal and the colour
points appear on the screen. To avoid the bad effect, an auto degaussing circuit is designed. When
the TV set is magnetised you should cut off the power to the set for at least 30 minutes to assure the
auto degaussing circuit woks well.