Operations examples (continued)
33
Screen adjustment
The screen adjustment includes H-SIZE, H-PHASE, V-SIZE,
VPHASE, PIN-BALANCE, PINCUSHION, TRAPEZOID,
PARALLELOGRAM, H-MOIRE, V-MOIRE, ROTATION, etc.
Press MENU button to call up the main menu, press CH or
CH button to move the cursor to SCREEN ADJUST icon.
Press MENU button again to enter into SCREEN ADJUST
sub-menu.
Press CH or CH button to move the cursor and select your
wanted menu item.
Press MENU button to confirm the choice. If the value of the item
is adjustable, go to the next step, otherwise go to above 3 step
after completion of switch operation if you want to continue the
adjustment.
Press CH or CH button to adjust the level until you are
satisfied.
Press MENU button to exit this item's adjustment.
Repeat the above 3~6 steps to adjust other items. After
completion of adjustment, select EXIT icon or press
TEXT/IMAGE button to exit the SCREEN ADJUST menu. Or
you can wait for some time and the OSD will automatically
disappear.
RECALL: It's used to restore parameters of the current display
mode to factory default setting.
EXIT: It's used to exit the current OSD menu.
DEGAUSS: It's used to activate the degaussing circuit. (To conduct
the next degauss operation you should wait for 10-20
minutes.
6500: It's used to set the state of colour temperature which suits for
professional departments such as television and broadcast
station.
9300: It's used to set the state of colour temperature which suits for
general user.
Function menu item's selection
2
1
3
4
5
6
7