Filter
Top Products
Memorizing the Channels
When you turn on the TV for the first time, you should perform an auto channel search to set up stations on your TV.
Note: Be sure to select the proper input source (ATV/DTV) before operation.
1
Highlight VHF CH ( or UHF CH) item, press 3or4 button to
select your desired channel number.
In Channel menu, press 6or5 to select DTV Manual Tuning
item, then press4or OK to access.
2
If desired digital programs cannot be searched by Auto Tuning, you can make
use of DTV Manual Tuning to search programs manually.
Press OK to begin the manual DTV channel search.
3
At the bottom of the menu screen the DTV Signal strength bar is
displayed. You can make use of it to check how strong your DTV
signal is and whether you need to adjust your antenna or digital
cable input. The higher the signal strength is, the less likely you are
to experience picture degradation.
15
Picture Sound Time Option Lock Channel
Select
Move
Menu
Exit
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
Auto Channel Search
You should perform an auto channel search to search for all channels available and stores them in memory.
1
Press MENU and the main menu screen displays.
And before you start Auto Tuning, it is necessary to select a country firstly.
Then the TV begins memorizing all ATV/DTV channels available in
your area. During the process, you can press MENU to skip the
search, or EXIT to stop.
Auto Tuning
Country Selection
Australia
Cancel
Start
3
Highlight Auto Tuning item, and press 4or OK to access.
2
Press 3or4to select Channel menu, press 6 to access the menu.
4
5
Now a confirmation box appears on the screen. Press 3or4to
highlight Start item, and then press OK to begin the auto
channel search.(If you want to cancel, press 4to select Cancel
item, and use OK to confirm.)
Channel Tuning
2 %...
TV
ATV
DTV
Radio
Press <Menu> to skip.
Press <Exit> to exit.
:2
Programme(s)
:0
:0
Programme(s)
Programme(s)
78.50MHz
Manual Searching for DTV programs
Picture Sound Time Option Lock Channel
Select
Move
Menu
Exit
ATV Manual Tuning
Programme Edit
Auto Tuning
DTV Manual Tuning
DTV Manual Tuning
Please select channel then
Press OK to search
Bad
Good
Normal
VHF CH
6
Select
Menu
Then all the digital programs available in this channel will be
searched and stored. During the process, you can press MENU or
EXIT to exit the search.
4
Note
= In the confirmation box, the Country Selection item is defaulted to be Australia
and cannot be adjusted.
Exit