Filter
Top Products
Memorising the Channels
18
Your PDP TV can memorise and store all the available channels. After the available channels are memorised,
use CH+/- to scan the channels.
Storing Channels in Memory Automatically
Press MENU to display the menu main page.
Press repeatedly to select CHANNEL item.
Press ENTER or to access the submenu.
Press repeatedly to select Auto Search item.
Press to start the process of auto searching. The unit stores all
available channels in memory automatically.
During the process of the Auto Search, you can press MENU to exit.
Note:
Before you start Auto Search, please refer to the section of [Setting
Colour and Sound System] to select a proper sound system according
to your area.
Storing Channels in Memory Manually
Use Manual Search if desired channels cannot be memorised or if you would
like to store channels to specific channel numbers one by one.
Press MENU to display the menu main page.
Press repeatedly to select CHANNEL item.
Press ENTER or to access the submenu.
Press repeatedly to select Manual Search item.
Press start manual search.
Pressing the set searches towards higher frequency;
Pressing the set searches towards lower frequency;
The search stops when a program is found and this program will be
stored in current channel.
Setting Auto Frequency Control (AFC)
Press MENU to display the menu main page.
Press repeatedly to select CHANNEL item.
Press ENTER or to access the submenu.
Press repeatedly to select AFC item.
Press to select ON or OFF.
When the AFC is set to ON, the unit will automatically tune the program
frequency to provide the best possible picture and sound.
Channel Edit
Auto Search
Manual Search
Skip
AFC
Fine Tune
Right to select
L/R to select
OFF
ON
+00
CHANNEL
Channel Edit
Auto Search
Manual Search
Skip
AFC
Fine Tune
Right to select
L/R to select
OFF
ON
+00
CHANNEL
Channel Edit
Auto Search
Manual Search
Skip
AFC
Fine Tune
Right to select
L/R to select
OFF
ON
+00
CHANNEL