Filter
Top Products
Basic Operations
17
Changing Channels
Using the Channel Buttons (CH+ or CH-)
Press the CH+ or CH- to change channels.
When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the
unit has memorised.
You will not see channels that were erased.
Direct Accessing Channels
Press the number buttons to go directly to a channel.
To select a one-digit channel: press the 0-9 number buttons to input the channel number and press ENTER or wait for
some seconds to go to the selected channel.
To select a two-digit channel: press the 0-9 number buttons to input the channel number and press ENTER or wait for
some seconds to go to the selected channel.
To select a three-digit channel: press the 0-9 number buttons to input the channel number one by one, then the unit
goes to the selected channel.
Note:
When you use the number buttons, you can directly select channels that were erased.
Using the Return button
Press this button to switch between the current channel and the previous channel.
Adjusting the Volume
Using the volume buttons (VOL+ and VOL-)
Press the VOL+ or VOL- to increase or decrease the volume.
Using the MUTE button
At any time, you can temporarily cut off the sound using the MUTE button.
Press the MUTE button and the sound cuts off.
To turn mute off, press the MUTE button again.
Selecting a MENU Language
Press MENU to display the menu main page.
Press CH+/- repeatedly to select Display page.
Press ENTER or VOL+/- to access the submenu.
The Language item will be highlighted automatically.
Press ENTER or VOL+/- to select a proper menu language.
Press Menu to exit.
Note:
In some models, there may be only one menu language available. In this case, the menu language not be
adjusted by the user.
1
2
1
2
3
4
5
On
English
Bright
Yes
Move Select
Menu to exit
Language
Transparency
Back Light
Factory Reset
DCDi
Display