Filter
Top Products
3.3 - Installation in the Panasonic SA-PM08.
In the Panasonic SA-PM08 the installation has to done as follows:
à Connect the RED wire to C6501 (+).
à Connect the BLACK wire to the C6501 (-).
à Connect the BROWN wire to the shown testpoint TP6204 or
pin 2, IC6303.
à Connect the WHITE wire to the shown testpoint TP6202 or pin
6, IC6303.
à Connect the GREY wire to the testpoint TP6202 or pin 5,
IC6303.
à Connect the PURPLE wire on pin 1, IC6303.
à Connect the BLUE wire on pin 4, IC6301.
Fig. 7
Fig. 8