Panasonic AG-3200P VCR User Manual


 
8
Page 8 May 28, 2002 2:53 pm
Setting clock manually
Manual Clock Set
First follow steps
1
11
1
to
2
22
2
in Preparations above, then go to the
following steps.
A
Set time, date and year
Press
rt
until the desired time appears,
then press OK or
e
. Set the date and year
in the same way.
Holding
rt changes the time in 30-
minute intervals, or changes the date in
15-day intervals.
B
Select D.S.T. mode
Press OK or
e
to move the highlight bar to
D.S.T., then press
rt
to select the
desired setting.
ON: Adjustment will be made by the
built-in clock itself.
OFF: Select when Daylight Saving Time
does not apply to you.
C
Start clock
Press MENU and normal screen appears.
To make corrections any time during the process
Press OK or
e
repeatedly until the item you want to change
blinks, then press
rt.
Tuner Setting
Setting channels automatically
Auto Channel Set
Perform Auto Channel Set only if channels have not been set
correctly by the Plug&Play setting.
A
Access Main Menu screen, then Tuner
Set screen
Press MENU on the Remote. Press
rt
to
move the highlight bar (arrow) to TUNER
SET, then press OK or
e
.
B
Perform Auto Channel Set
Press rt to move the highlight bar
(arrow) to AUTO CHANNEL SET, then
press OK or
e. The VCR selects the correct
band (TV or CATV) automatically during
Auto Channel Set.
When Auto Channel Set is complete,
SCAN COMPLETED appears on
screen.
If the scan was unsuccessful, SCAN
COMPLETEDNO SIGNAL–” appears on
screen. Check the connections and start
again.
Press MENU to return to normal screen.
Setting channels manually
Manual Channel Set
You can add the channels you want or delete the channels you do
not want manually.
A
Access Main Menu screen, then Tuner
Set screen
Press MENU on the Remote. Press
rt
to
move the highlight bar (arrow) to TUNER
SET, then press OK or
e.
B
Access Manual Channel Set screen
Press
rt
to move the highlight bar
(arrow) to MANUAL CHANNEL SET,
then press OK or
e
.
C
Add or skip desired channels
To add channels
A
Press the Number keys on the Remote
to input a channel number you want to
add.
B
Press OK or
e
to set to ADD.
C
Repeat A to B to add other channels.
Press MENU to return to normal screen.
To skip channels
A Press rt or the Number keys to select a channel number you
want to skip.
B Press OK or e to set to SKIP.
C
Repeat A and B to skip other channels. Press MENU to return
to normal screen.
Manual setting of the clock will be lost after a power failure
occurs.
After a power failure occurs, band selection will be reset to
CATV.
AG-3200P-EN-1.fm Page 8 Tuesday, May 28, 2002 2:54 PM