Panasonic AG-VP310 DVD VCR Combo User Manual


 
20
Playback/ Record on a Tape
Ready Checklist
All connections are made. (pp. 12 ~ 15)
TV and DECK are plugged in.
TV is on and tuned to CH 3, 4, or VIDEO.
Remote is in VCR mode. (Press VCR.)
Insert a tape.
DECK power comes on. If Auto VCR/TV (see
p. 32) is set to OFF, press VCR/TV on the
remote for VCR mode.
If tape has no rec. tab (p. 6), auto play begins.
Special Features During Play
1
2
Press PLAY* to play a tape.
Playback a Tape
These features work best in SP or SLP mode.
The sound will be muted.
To reduce picture noise, see Manual
Tracking Control on page 4.
After 3 minutes in Still or Slow mode, VCR
stops to protect the tape and the video heads.
Notes
Insert a tape.
2
1
Playback using DECK buttons
Press PLAY.
Multi Function Display
Press STOP/EJECT to stop
and/ or eject a tape.
VCR
DVD
EJECT
CH /
REW/
SLOW-
FF/
SLOW+
PLAY
PAUSE/
STILL
VCR/TV
STOP
REC
SPEED
Picture interruption may occur with some TVs.
FF and REW search speed may vary depending
on current tape position.
After 10 minutes in search mode, VCR returns to
Play mode to protect the tape and the video heads.
Notes
3
Press REW/SLOW- or FF/SLOW+ in Stop
mode to rewind or fast forward a tape.
Press STOP to stop a tape.
Forward/Reverse Scene Search
Press FF/SLOW+ or REW/SLOW-.
Press PLAY to release.
After search has begun, each additional press of
FF or REW changes speed
.
Rapid Rewind/FF
Rewinds a T-120 tape in approx. 1 minute.
Press EJECT on remote,
or STOP/EJECT on DECK to eject a tape.
Still (Freeze) Picture
Press PAUSE/STILL.
Press PLAY to release.
Frame by Frame Picture
Press PAUSE/STILL in Still mode.
Press PLAY to release.
Slow Motion Picture
Press FF/SLOW+ (increase speed) or
REW/SLOW- (decrease speed) in Still
mode.
Press PLAY to release.
AG-VP310 P1-25 (040510).p65 2004/05/10, 15:0120