Filter
Top Products
-
- 3 -
For AW-CB400L
Input connectors
DC 12V IN: XLR, 4 pins
GND: GND terminal
Output connectors
CONTROL OUT
TO CONTROL PANEL: D-SUB 29-pin
CONTROL OUT
TO CAMERA 1 to 5: RJ45, camera control RS-422 level
10Base-T straight cable (UTP category 5), max. 1000 meters
Input/output connectors
INCOM (top panel): XLR, 4 pins
TALLY/INCOM: D-SUB 15-pin
TALLY: Contact input (do not apply a voltage in excess of 5V)
INCOM: 4-wire system
Switch functions: DATA SET, menu, camera control selection, DTL, scene file selection, gain selection,
BAR/CAM switching, white balance selection, AWC, ABC, call, lens iris
AUTO/MANU/LOCK switching, option switches (1 to 4)
Adjustment functions: LCD contrast, INCOM level, lens iris, menu settings, R-GAIN, B-GAIN, pedestal, R-PED,
B-PED
Ambient operating temperature: - 10˚C to +45˚C
Storage temperature: - 20˚C to +60˚C
Ambient operating humidity: 30% to 90% (no condensation)
Dimensions (W x H x D): 100 x 85 x 266 mm
Weight: 1.4 kg
Finish: Colour resembling Munsell 3.5 paint
Weight and Dimensions indicated above are approximate.
Specifications are subject to change without notice.
Supply voltage: DC 12.0 V
Power consumption: 3.8 W
Specifications
indicates safety information.
Accessories
Pan/tilt control panel (AW-RP400) connecting cable ...... 1
Tally/INCOM connector (D-SUB 15-pin) ......................... 1
Rack-mounting adaptors ................................................. 2
Join-up fixture .................................................................. 1
Mounting screws (M4 x 8 mm) ........................................ 8
Join-up screws (stepped screws) .................................... 2
Joining sticker .................................................................. 2