Filter
Top Products
8
TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature which
allows channels to skip up or down to the next channel set into
memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into the
TV's memory. In addition to normal VHF and UHF channels,
this TV can receive up to 113 Cable TV channels. To use this
TV with an antenna, set the TV/CATV menu option to the TV
setting. When shipped from the factory, this menu option is in
the CATV setting.
TV/CATV SELECTION
Press ▼ to select MODE mode and
then press . Then press or to
select the TV or CABLE mode, then
press ACTION.
Press ACTION twice.
1
2
3
Press ACTION and press to
select the SET UP mode, then press
ACTION.
NOTE:
Contact your cable company to determine the type of cable system
used in your area.
SET UP
LANGUAGE/IDIOMA/LANGUE
AUTO PROGRAM
MANUAL PROGRAM
CC
/ACTION
: OFF
/
MODE : TV CABLE
PICTURE
LOCK
EXIT
TIMER
SET UP
AUDIO
AUTOMATIC CHANNEL MEMORY
Press ACTION and press to
select the SET UP mode, then
press ACTION.
Press ▼ twice to select AUTO
PROGRAM mode and then press
. The TV will begin memorizing all
the channels available in your area.
Press ACTION twice.
1
2
3
PICTURE
LOCK
EXIT
TIMER
SET UP
AUDIO
1
2
MANUAL CHANNEL MEMORY
Press ACTION and press to select
the SET UP mode, then press
ACTION.
Press ▲ twice to select MANUAL
PROGRAM mode and then press .
Select the desired channels to be
added or deleted using Direct
Channel Selection (10 keys. 0-9),
CH ▲ or ▼.
Press or to select ADD or
DELETE.
If an unmemorized channel was
selected (step 3), the channel
indicator will be yellow. Press or
if you wish to ADD the
unmemorized channel. The channel
indicator will change from yellow to
blue when a channel is added and
the channel will be memorized.
If a memorized channel was selected (step 3), the channel
indicator will be blue.
Press or if you wish to DELETE the channel from
memory. The channel indicator will change from blue to yellow
when a channel is deleted.
Repeat Steps 3 and 4 for each channel to be added or
deleted.
Press ACTION three times.
4
5
3
ADD CH 012
SETTING TIMER
You can set the TV to turn off after a preset amount time.
Press ACTION and press to select the TIMER mode, then press ACTION.
Press and then press or to select desired time, then press ACTION.
1
2
After the timer is programmed, the display will disappear then reappear momentarily every ten minutes to
remind you the timer
function is
operating.
To confirm the timer setting, repeat
step 1. The remaining time will be displayed.
To cancel the
timer setting, select the OFF.
PICTURE
LOCK
EXIT
TIMER
SET UP
AUDIO
3N42201A E Cover-P08 7/7/03, 20:158