Panasonic CT-30WC14 Flat Panel Television User Manual


 
10 z
SPECIAL FEATURES
ENGLISH
Special Features
ASPECT Button
The ASPECT button on the remote control lets you choose
one of four display modes, depending on the formats of the
received signal and your preferences.
BBE Button
Press this button to turn BBE sound feature On or Off.
SAP Button
Press this button to let you cycle through different audio modes.
For example:
If receiving STEREO, SAP and MONO or receiving
STEREO and MONO only, pressing SAP button will
toggle the audio as follows:
Split Operation
This feature lets you watch two different channels side by
side with or without an external video source.
Procedure
Press to display Split frame.
Choose channels for the SPLIT frame by pressing
button. The right indicator ( ) will appear
in Split frame, then use or the remote
control numeric keypad.
Note: Split frame channel can only be changed while right
indicator ( )is displayed in split frame.
Select channels for the Main picture by pressing
or use the remote control numeric keypad.
•Press to switch the SPLIT FRAME and MAIN
PICTURE source.
•Press to view picture source status.
Press to cancel Split frame.
Split Operation With a Cable Box
To view premium (scrambled) cable channels through your
cable box in the Main Picture:
Note: Use this procedure if you want to watch premium cable
channels in the Main Picture while viewing a television
program or video in the Split frame.
Procedure
Tune TV to Channel 3.
Press on the remote control to display Split
frame.
Note: Audio is from the Main Picture only.
Verify that the Cable box is ON.
Choose channels for the Main Picture by tuning the
cable box.
Choose channels for the SPLIT frame by pressing
button, then use or the remote
control numeric keypad.
Note: Swap is not available when using the cable box to tune
channels. If your cable box has video output, it can be
connected to the TV to allow you to use all SPLIT
functions.
Customer Options depending on Component Input Signal
INPUT
SIGNAL
DISPLAY ON SCREEN
ASPECT BUTTON
OPTIONS
1080i 16:9 only No options
480p (16:9) Default to 16:9
4:3, Full or Zoom (see
below)
480p (4:3)
Default to FULL mode.
Note: Will stretch picture
horizontally.
4:3, Full or Zoom (see
below)
480i Default to JUST mode
4:3, Full, Just or
Zoom (see below)
Input Signal
ASPECT
4
3
Image on
16:9 Screen Size
4:3
480i or 480p
This will display a 4:3 picture
at its standard 4:3 size with
black side bars. (Not
recommended for viewing
4:3 pictures as it may create
a permanent image on
screen if displayed for a
prolonged period of time.)