Filter
Top Products
6
I
NSTALLATION
Optional Equipment Connections
VCR Connection
Follow this diagram when connecting your television to a VCR only.
Note: The remote control must be programmed with supplied codes to operate the
VCR. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Viewing a television program
Procedure
1. Select ANT1 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to the television program you want to view.
Viewing a video
Procedure
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Begin the video.
Recording a television program
Procedure
r Option A (Recording and viewing the same program)
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Tune the television to Channel 3 or 4, depending on your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
r Option B (Recording one program while viewing another program).
1. Select ANT1 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Using the VCR, tune to the television program you want to record.
4. Begin recording.
5. Press the TV/VIDEO button on the remote control to switch back to TV mode.
6. Tune the television to the television program you want to view.
VCR
COMPONENT VIDEO INPUT
AUDIO
CENTER CHANNEL
INPUT
ANT 1
ANT 2
SPLIT OUT
VIDEO
Y
P
B
P
R
L
R
AUDIO
INPUT
1
INPUT
2
INPUT
3
TO AUDIO
AMP
S-
VIDEO
VIDEO
L
R
PROG
OUT
L
R
VIDEO OUT
AUDIO OUT
L
R
ANT IN
ANT OUT
CONNECTIONS ON BACK OF TV
CABLES NOT SUPPLIED
Incoming
Cable
Use either the
S-Video or Video
connection.
0338E Prod.fm Page 6 Wednesday, February 7, 2001 11:07 AM