Filter
Top Products
6
INSTALLATION
VCR and Cable Box Connection
Follow this diagram when connecting your television to both a VCR and a cable box.
Note: The remote control must be programmed with supplied codes to operate the VCR and
the cable box. See Programming the Remote Control in the Remote Control Quick
Reference Guide.
Viewing a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan (Program Channels).
2. Tune the television to Channel 3.
3. Using the cable box, tune to the premium (scrambled) cable channel you want to view.
Note: To use special features such as Favorite Channels and Channel Captions (see
Special Features section for more information), ANT1 must be selected in the SET UP
menu under Prog Chan.
Recording a premium (scrambled) cable channel
Procedure
1. Select ANT2 in the SET UP menu under Prog Chan.
2. Press the TV/VIDEO button on the remote control to select the video input (VIDEO 1,
VIDEO 2, etc.) connected to your VCR.
3. Turn the VCR ON.
4. Tune the VCR to Channel 3 or 4, depending on the switch setting on the back of VCR.
5. Using your cable box, tune to the premium (scrambled) cable channel you want to
record.
6. Begin recording.
Note: To view a different channel while recording:
• Select ANT1 in the SET UP menu under Prog Chan.
• Press the TV/VIDEO button on the remote control to TV mode.
• Tune the television to a television program (except another premium (scrambled)
cable channel).
L
R
AUDIO OUT
VIDEO OUT
S-VIDEO OUT
VCR
Incoming Cable
CABLES NOT SUPPLIED
CONNECTIONS ON BACK OF TV
ANT 1
SPLIT OUT
ANT 2
LR
AUDIO
VIDEO
S-VIDEO
INPUT 1
INPUT 2
INPUT 3
LR
TO
AUDIO
AMP
CENTER CHANNEL
INPUT
PROG OUT
Use either the
S-Video or Video
connection.
CABLE BOX
ANT INPUT
OUTPUT
ANT INPUT
ANT OUTPUT