Panasonic CT-L1400 Flat Panel Television User Manual


 
15
Basic Controls
SLEEP button
The LCD TV may be preset to switch
to stand-by after a fixed period. The
setting changes to 30 minutes, 60
minutes, 90 minutes and 0 minutes
(SLEEP timer cancelled) each time
this button is pressed.
When 3 minutes remain,
3 will
flash. The SLEEP timer is cancelled
if a power interruption occurs.
Before the timer automatically turns
the power off, the remaining time will
blink on the screen (3 for 3 minutes,
2 for 2 minutes and 1 for 1 minute
before the power goes off).
Power button
Press to turn this set ON or OFF.
(See page 13)
Note:
The LCD TVs power cord must
first be plugged into the wall
outlet and then turned on at the
Main POWER switch.
Direct program number
Selection buttons
TV/VIDEO button
The input mode
changes each time
this button is pressed.
MENU
ADJUST
PICTURE
AUDIO
SET UP
PICTURE ADJUST
AUDIO ADJUST
30 60
0
90
R-TUNE button
Switches to previously viewed
channel or video mode.
MUTE button
Press to mute the sound.
Press again to reactivate sound.
Sound is also reactivated when
power is turned off or volume level
is changed.
ASPECT button
MENU button
Press to display
MENU screen,
press again to
clear.
RETURN button
Press to return to the previous
screen.
16 : 9
4 : 3
RECALL button
Press to display time, channel, sleep
timer and other options.
SAP button
Selects Audio mode (See page 21).
Increases volume
Moves cursor to
the right during
menu mode.
Changes to the next channel down
Moves cursor downward during menu
mode.
Changes to the next channel up
Moves cursor upward during menu
mode.
Reduces volume
Moves cursor to
the left during
menu mode.
STEREO SAP MONO
POWER
TV/VIDEO VOLUME CHANNEL
Remote control sensor
Main POWER switch
First press the POWER switch to turn the set on.
<Top Side Controls>
Channel Up/Down
Volume Up/Down
TV/VIDEO button
Operate your Remote control pointed to the Remote control sensor
(Within about 6 meters in front of the TV set.)