Panasonic AJ-D750P VCR User Manual


 
USER menu
<TIME CODE>
Item
Setting
No.
Superimposed
No.
Superimposed
display
display
500
VITC
POS-1
501
VITC
POS-2
502
VITC
BLANK
503 TCG
REGEN
504
REGEN
MODE
505 EXT TC
0000
SEL 0001
0000
10L
0001 11L
0002 12L
0003
13L
0004
14L
0005
15L
0006
16L
0007
17L
0008
18L
0009
19L
0010 20L
0000
10L
0001
11L
0002
12L
0003
13L
0004
14L
0005
15L
0006
16L
0007
17L
0008
18L
0009
19L
0010 20L
0000
BLANK
0001
THRU
0000 TC&UB
0001
TC
0002 UB
0000 AS&IN
0001
ASSEM
0002
INSRT
0003 SW
LTC
VITC
Description
This sets the position where the VITC signal is to be inserted.
(The same line as for VITC POS-2 in 501 cannot be
selected.)
This sets the position where the VITC signal is to be inserted.
(The same line as for VITC POS-1 in 500 cannot be
selected.)
This selects whether to output the VITC data to the positions
selected by VITC POS-1 in 500 and VITC POS-2 in 501.
0:
Data is not output.
1: Data is output.
This selects the signal to be regenerated when the time code
generator (TCG) in the REGEN mode.
0:
Both the time code and user bit are regenerated.
1:
Only the time code is regenerated.
2:
Only the user bit is regenerated.
This selects whether the time code is to be regenerated
during automatic editing using the units control panel.
0:
Time code is regenerated with assemble or insert editing.
1:
Time code is regenerated with assemble editing.
2:
Time code is regenerated with insert editing.
3:
Setting complies with REGEN/PRESET switch setting.
This selects the time code to be used when an external time
code is to be used.
0:
The LTC of the TIME CODE IN connector is used.
1:
The video signal LITC is used.
The underline on the setting item denotes the initial setting.
-52-