Panasonic DMP-BD85EGK Blu-ray Player User Manual


 
12
VQT2H76
STEP 5 : Setting
After connecting your new player for the 1st time and pressing
the power button, a screen for the basic settings will appear.
Preparation
Turn on the television and select the appropriate video
input on the television.
1 Press [Í POWER].
Setup screen appears.
If this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 2 or later via an HDMI cable,
then the setting information on the TV is acquired by this
TV.
2 Follow the on-screen instructions and
make the settings with [3, 4] and press
[OK].
After completing “Easy Setting”, you can perform “Network
Easy Setting”.
You can perform this setup anytime by selecting “Easy Setting” in the
Setup menu. (
> 29)
Initial setting is set to “2ch (Downmix) + 5.1ch”, so you will need to select
“7.1ch” if using the 7.1ch output.
After completing “Easy Setting”, you can continuously perform
“Network Easy Setting”.
Before you perform the wireless network settings on this
unit, confirm the set up of your Wireless router (Access
point) is done correctly on your PC.
1 Select “Wired” or “Wireless” and press
[OK].
2 Follow the on-screen instructions and
make the settings with [3, 4, 2, 1] and
press [OK].
For wireless LAN connection:
If you are using a Wireless router (Access point) that supports
WPS, you can easily perform the settings by selecting “WPS
(PUSH button method)”.
Otherwise, perform the settings by selecting “Search for
access point” or “Manual setting” in “Other methods”.
WPS (Wi-Fi Protected Setup) is a function that facilitates
settings relating to the connection and security of wireless
LAN devices. To see whether your Wireless router (Access
point) supports WPS, check the Wireless router operating
instructions.
Easy Setting
OK
RETURN
Analog Audio Output
Set unit’s analog audio output.
Select only “7.1ch” to enjoy audio from a
receiver through 7.1ch analog connections.
Otherwise, select “2ch (Downmix) + 5.1ch.”
2ch (Downmix) + 5.1ch
7.1ch
Network Easy Setting
OK
RETURN
Network Easy Setting (Connection Check)
Wired
Wireless
A settings check for home network and Internet connections
is now being conducted.
Please select a connection mode first.
Current setting : Wired
LAN cable connection:
Connect a LAN cable to the unit and select “Wired.”
Wireless LAN connection:
Insert a compatible Wireless LAN Adaptor to USB port
and select “Wireless.”
Access point is necessary for Wireless LAN connection.
OK
RETURN
Access Point Connection Setting
Select a connection method to use with an access point
of Wireless LAN.
Please refer to the operating instructions of the access
point about connection methods.
WPS (PUSH button method)
Other methods
p
WPS (PIN code method)
Search for access point
Manual setting
DMP-BD85VQT2H76_eng.book 12 ページ 2009年12月3日 木曜日 午後4時57分