Filter
Top Products
9
VQT4V26
Getting started
1 Standby/on switch (Í/I) (> 14)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
still consumes a small amount of power.
2 Open or close the disc tray (> 17)
3 Blue LED
It is possible to set the LED to turn on/off.
(> 34)
4 Start play (> 20)
5 Stop (> 20)
6 Display
7 USB port (> 17)
8 V.OFF LED (Video off LED)
It is possible to set the LED to turn on/off.
(> 34)
9 SD card slot (> 17)
10 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and
right
11 Disc tray (> 17)
Rear panel terminals (> 10–13)
1 Standby/on switch (Í/I) (> 14)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
still consumes a small amount of power.
2 Start play (> 20)
3 Stop (> 20)
4 Open or close the disc tray (> 17)
5 Display
6 USB port (> 17)
7 SD card slot (> 17)
8 Remote control signal sensor
Distance: Within approx. 7 m (23 feet)
Angle: Approx. 20e up and down, 30e left and
right
9 Disc tray (> 17)
Rear panel terminals (> 10–13)
SD CARD
IR
4568 791011
12
3
[BDT330]
Pull to flip down
the front panel.
SD CARD
5789
6
1234
[BDT230]
Pull to flip down
the front panel.
DMP-BDT330_230_VQT4V26_eng.book 9 ページ ２０１２年１２月２７日 木曜日 午前１１時１３分