Filter
Top Products
10
SQT0099
Connections a nd settings
Connecting to a TV
Connect the AC mains lead after making all connections.
≥
Before making any connections, we recommend that you temporarily disconnect all the units from AC power.
≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
It is recommended that you use Panasonic’s HDMI cable. When outputting 1080p or 24p (4K) signal,
please use HDMI cables 5.0 meters or less.
[Except[t he[United[Kingdom[and[Ir eland] The HDMI-compliant cable is supplied with this unit.
≥ [ BDT460] : Use HDMI AV OUT MAIN terminal.
≥ This unit consumes a small amount of AC power (> 35) even when turned off in standby mode. For
the purpose of energy conservation, the unit should be disconnected if you will not be using it for
extended period of time.
Connecting to an amplifier/receiver
≥ [ BDT460] : Use HDMI AV OUT MAIN terminal.
≥ Set “Digital Audio Output” (> 26).
≥
When connecting to a non-3D or 4K compatible amplifier/receiver, connect this unit to a TV, then connect
the TV and the amplifier/receiver. Please note, however, that the audio can only be up to 5.1ch.
≥ When using the TV or amplifier/receiver that does not have the indication of “(ARC)”
(non-ARC-compatible) on the HDMI terminal, the amplifier/receiver and TV must also be connected
using an optical digital cable in order to enjoy the TV’s sound through the amplifier/receiver.
[Fo r[South[East[Asia]
2 AC mains leads are supplied.
Thailand: With a label
HDMI IN
[BDT460]
[BDT360]
AC mains lead (supplied)
To a household mains
socket
HDMI cable
([Excep t [ th e[U nited[Kingdom[ an d[ I r eland] supplied)
Perform either one of the following connections in accordance with your amplifier/receiver input terminal.
HDMI AV OUT
HDMI IN
(ARC)
HDMI OUT
(ARC)
HDMI IN
HDMI cable
Amplifier/receiver
[BDT460]
[BDT360]
HDMI cable
([Except[the[United[Kingdom[and[Ireland] supplied)
DMP-BDT460&360_EBGNGA-SQT0099.book 10 ページ ２０１４年１月２８日 火曜日 午後３時５７分