Panasonic DMR-EX85 DVR User Manual


 
65
RQT8388
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4] to select “To Others”
and press [ENTER].
3 Press [3, 4] to select “Setup” and
press [ENTER].
4 Press [3, 4] to select “Tuning” and
press [1].
You can create four groups of channels for making viewing and recording
easier. Editing these groups does not affect the channel setting itself.
Timer recording may not work correctly if you edit the groups
during timer recording standby.
After performing steps 1–4
5 Press [3, 4] to select “Edit
Favourites” and press [ENTER].
6 Press the “Green” button to select the
group.
To add channels to a group
After performing steps 1–6
1Press [3, 4] to select the channel and press the
“Yellow” button.
Repeat this step to add other channels.
Press the “Blue” button to add all the available channels to the
group. (Only when no channels have been added to the group.)
2Press [ENTER] to save the group.
To change the order of channels of a group
After performing steps 1–6
1Press [1].
2Press [3, 4] to select the channel to move and
press the “Green” button.
3Press [3, 4] to select the new position of the
channel and press the “Green” button.
Repeat the steps 23 to move other channels.
4Press [ENTER] to save the group.
To delete channels on a group
After performing steps 1–6
1Press [1].
2Press [3, 4] to select the channel and press the
“Yellow” button.
Repeat this step to delete other channels.
Press the “Blue” button to delete all the channels from the group.
3Press [ENTER] to save the group.
Deleting a channel from a group does not affect the channel itself.
You can still select the channel from the “All Services” group.
To change the name of a group
After performing steps 1–6
1Press [1].
2Press the “Red” button.
58, Entering text
To browse through the list
Press [WXCH].
To exit the screen
Press [RETURN] several times.
After performing steps 1–4
5 Press [3, 4] to select “Add New DVB
Services” and press [ENTER].
The unit starts searching for newly available terrestrial digital
channels. This takes about 5 minutes.
A message is displayed when the search is finished.
6 Press [ENTER] to save the newly
found channels.
To stop partway
Press [RETURN].
The channels found before stopping are not saved.
To exit the screen
Press [RETURN] several times.
You can check the quality and strength of digital broadcast signals.
Realign the aerial if you are receiving a poor signal.
When “Signal Condition” is displayed in grey and cannot be selected:
1 Press [RETURN] several times to exit the screen.
2 Press [WXCH] to select a digital channel. “D” appears on the
unit’s display.
3 Display the Setup menu again (left).
After performing steps 1–4
5 Press [3, 4] to select “Signal
Condition” and press [ENTER].
The quality and strength of the signal are shown.
Press [WXCH] to select the channel.
Signal Quality
Below 2 (display red): The signal quality is so poor that there may
be interference in the pictures and sound.
2–5 (display orange): The signal quality is basically adequate, but
brief interference in the pictures and sound
is possible in isolated case.
Over 5 (display green): Optimum picture and sound quality.
Signal Strength
The display for signal strength is grey. “0” means signal strength 0%,
“10” means signal strength 100%.
If the signal is too strong, the display will change from grey to red.
Reduce the signal amplification at your aerial.
When the signal is weak, check that the aerial is correctly positioned
and that all digital broadcasts for the current channel have not
finished for the evening.
To exit the screen
Press [RETURN] several times.
Tuning
Edit Favourites
Setup
Disc
Picture
Sound
Display
Connection
Tuning
Edit Favourites
Auto-Setup Restart
Digital
Analogue
Add New DVB Services
Signal Condition
Manual
Others
ENTER
RETURN
TAB
SELECT
Edit Favourites
RETURN
SELECT
Favourite Select Add AllAdd
All Services
2 ABC
20 ABC HDTV
Favourite 1
Page -
Add New DVB Services
Signal Condition
Add New DVB Services
Please wait! Ch 6 69
Prog. QualityChannel Service Name Net ID TS ID
RETURN
RETURN: to cancel
Signal Quality 010
Signal Strength 010
2 ABC 2W DVB CH30
RETURN
CH +
CH –
Changing the unit’s settings
EH65.book Page 65 Friday, September 1, 2006 9:46 AM