Filter
Top Products
27
RQT7664
Playing back
This function works only when the elapsed play time is displayed.
§
Only when you have set “Progressive” to “On” in the SETUP menu
(➡page 12).
Status messages appear on the television when you operate the unit
to show the condition of the unit.
Press [STATUS].
The display changes each time you press the button.
≥Displayed information are examples.
≥TV audio type
STEREO: STEREO/NICAM stereo broadcast
M1/M2: Bilingual/NICAM dual-sound broadcast
M1: NICAM monaural broadcast
Play menu—Change the play sequence
Repeat Play
≥All
≥Chapter
≥Group
≥PL (Play list)
≥Title
≥Tr ack
[VCD] [CD] (excluding MP3 discs)
[HDD] [RAM] [DVD-R] [DVD-V]
[DVD-A] [CD] (MP3 discs only)
[HDD] [RAM]
[HDD] [RAM] [DVD-R] [DVD-V]
[DVD-A] [VCD] [CD]
Select “OFF” to cancel.
Picture menu—Change the picture quality
Playback NR
Reduces noise and picture degradation.
Progressive
§
(➡page 46)
Select “ON” to enable progressive output.
Select “OFF” if the picture is stretched horizontally.
Transfer
§
[When “Progressive” (➡above) is set to “ON”.]
Select the method of conversion for progressive output to suit
the type of material being played (➡page 46, Film and video).
When the output signal is PAL
≥Auto
≥Video:
Detects 25 frame-per-second film content and
appropriately converts it.
Select when using “Auto”, and the video
content is distorted.
When the output signal is NTSC
≥Auto1
(normal):
≥Auto2:
≥Video:
Detects 24 frame-per-second film content and
appropriately converts it.
Compatible with 30 frame-per-second film
content in addition to 24 frame-per-second
film content. (Picture distortion may occur
depending on the content)
Select when using “Auto1” and “Auto2”, and
the video content is distorted.
Sound menu—Change the sound effect
V.S.S. [HDD] [RAM] [DVD-R] [DVD-V]
(Only with Dolby Digital with 2 or more channels)
Enjoy a surround-like effect if you are using two front speakers
only.
≥Turn V.S.S. off if it caused distortion.
≥V.S.S. does not work for bilingual recordings.
Dialog Enhancer [DVD-A] [DVD-V]
(Dolby Digital, 3-channel or over only, including a centre channel)
The volume of the centre channel is raised to make dialogue
easier to hear.
Status messages
13:50 XP18:53:50 11.10.
π T2 0:05.14 XP
π T1 0:00.10 SP
Remain
π
REC
PLAY
STEREO
L R
DVD REC
HDD
HDD/Disc indication
TV audio type being received (➡below)
Recording or play status/input channel
Selected audio type
Available recording time and
recording mode
Play position within the title
Title number and elapsed time during play
Title number and elapsed time during recording
Date and time
Recording mode
No display
Recording drive/
Transfer (dubbing) progress indicator
Used HDD space
27
7664en.book 27 ページ ２００４年６月８日 火曜日 午後６時０分