Filter
Top Products
18
RQT9075
Timer recording using G-CODE system [For]Australia]and]N.Z.]
Refer to “Advanced timer recording” (➡ 24–25) for
detail information.
[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW]
≥You can enter up to 32 programmes up to a month in advance.
(Each daily or weekly programme is counted as one programme.)
[RAM] [-RW‹V›] [+R] [+RW]
≥To use a new disc, formatting is necessary.
Preparation
≥Turn on the television and select the appropriate AV input to suit
the connections to this unit.
≥If recording to DVD, insert a disc that you can use for recording
(➡ 15).
≥Make sure that the clock settings are correct (➡ 61).
Entering G-
CODE numbers is an easy way of timer recording. You
can find these numbers in TV listings in newspapers and magazines.
1 Press [G-Code].
2 Press the numbered buttons to enter
the G-CODE number.
Press [2] to move back to correct a digit.
3 Press [OK].
≥Confirm the programme (start and end time) by using a TV
magazine, etc. and make corrections if necessary using
[3, 4, 2, 1] (➡ 24, step 3).
≥When “-- ---” appears in the “Name” column, you cannot set
timer recording. Press [3, 4] to select desired programme
position. After you have entered the information of a TV
station, it is kept in the unit’s memory.
4 Press [OK].
The timer programme is stored and the timer icon is
displayed.
“F” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 1–4 to programme other recordings.
Press [Í DVD] to turn the unit off.
∫ To cancel recording when recording has already
begun (➡ 24)
∫ To release the unit from recording standby
(➡ 24)
∫ Notes on timer recording (➡ 24)
G-CODE is a registered trademark of
Gemstar Development Corporation. The
G-
CODE system is manufactured under
license from Gemstar Development
Corporation.
STATUS
F Rec
REC MODE
REC
MANUAL SKIP
AUDIO DISPLAY
CREATE
CHAPTER
F
U
N
C
T
I
O
N
M
E
N
U
D
I
R
E
C
T
N
A
V
I
G
A
T
O
R
P
R
O
G
/
C
H
E
C
K
RETURN
PLAY/x1.3
PAU SE
STOP
SLOW/SEARCH
SKIP
INPUT SELECT
CH
0
9
8
7
6
54
3
2
1
CH
AV
¦
TV
DRIVE
SELECT
¦
DVD
VOL
DELETE
G-Code
EXIT
TIME SLIP
OK
OPTION
-/--
3, 4
1
2
¦DVD
[Australia]and]N.Z.]
G-Code
Record
1:58 SP
DVD
30:24 SP
HDDRemain
TUE 14.10.08. 12:53:00
Input G-Code Number 0-9, and press OK.
Timer
Recording
1:58 SP
DVD
30:24 SP
HDDRemain
TUE 14.10.08. 12:54:00
Mode
StopStartName Date
HDD
DVD
20:0019:0015. 7. TUE SP HDD
1 ARD
Programme Name
No.
Name
ARD
01
&
Timer icon
TUE 14.10.08 12:56:00
Mode
Stop
HDD
DVD
HDD
Drive
space
SP
OK
20:00
Programme
Check to make sure “OK”
is displayed (➡ 25).
RQT9075-L-Body1_mst.fm 18 ページ ２００８年２月２９日 金曜日 午前１１時５７分