Filter
Top Products
20
RQT6263
Advanced operations
a
d
e
b
c
Picture Menu
Unit information
\RAM\ \DVD-A\ \DVD-V\ [VCD]
Using On-Screen Menu Icons
a Current position [RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
b PG: Program number [RAM]
PL: Play list number [RAM]
T: Title number [DVD-V]
Track number [VCD] [CD]
G: Group number [DVD-A] [WMA] [MP3]
c T: Track number in group [DVD-A] [WMA] [MP3]
C: Chapter number [DVD-V]
Progress indicator
Indicates how far you have played through an item.
d Condition – play, pause, or slow/search
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
e Changing the time display [RAM] [DVD-A] [DVD-V] [VCD] [CD]
Press [3, 4] to show the elapsed play time or remaining time for the
program, track or title (or chapter during program and random play).
Elapsed play time [WMA] [MP3]
(display only, cannot be changed)
e.g. DVD-Video
a Picture Mode
≥N: Normal mode
≥C1 (Cinema 1): Mellows images and enhances detail in dark scenes
≥C2 (Cinema 2): Sharpens images and enhances detail in dark scenes
≥U1/U2/U3
§
: User mode (➡ right)
§
U3 appears only when PROGRESSIVE OUT indicator is off.
b Video Output Mode
(➡ page 25, Glossary—Interlace and progressive output)
480I: Interlace video (PROGRESSIVE OUT indicator off)
e
u
480P: Progressive video (PROGRESSIVE OUT indicator on)
You can change the video output mode only when “Progressive Out” in
the Video menu is set to “Enable” (➡ page 21).
c Transfer Mode
Select the method of conversion for progressive output to suit the type
of material being played (➡ page 25, Glossary—Film and video).
≥Auto 1 (normal): for viewing film material
≥Auto 2: for viewing film material (the same as Auto 1, but able to
convert 30-frame-per-second progressive video)
≥Video: for video material
d H Position (Horizontal position) (j20 to i20)
Change the picture’s position if it is off center.
1. Press [ENTER].
2. Press [2, 1] to move the picture.
3. Press [ENTER] to enter the position (saved even if you turn the unit
off).
When PROGRESSIVE OUT indicator is offWhen PROGRESSIVE OUT indicator is on
∫ User mode
To change the user mode
1. Select User mode and press [1] to highlight the number.
2. Press [3,4] to select “1”, “2” or “3”.
—MPEG Digital Noise Reduction—
e 3D-NR (0 to i4)
Reduces overall noise.
f Block NR (0 to i3)
Smoothes block noise.
g Mosquito NR (0 to i3)
Reduces the smudging that appears around contrasting sections of the
picture.
—Picture Control—
h Contrast (j7 to i7)
Increases the contrast between light and dark parts of the picture.
i Brightness (0 to i15)
Brightens the picture.
j Color (j7 to i7)
Adjust the shade of the picture’s color.
∫ User mode ∫ User mode
a
b
N
480P
d
c
Auto1
eafg
U 1
ba
U 2
480P
d
c
Auto1
a
b
N
480I
U 1
hai
j
eafg
U 2
U 3
ba
480I
U 1