Filter
Top Products
RQT7292
13
∫ “Display” tab
∫ “Others” tab
§1
Language options
[U.S.A.\and\Canada] : French and Spanish
[Asia] : Chinese
\Australia\and\N.Z.] :
French, German, Italian, Spanish, Portuguese, Swedish and Dutch
§2
The original language designed on the disc is selected.
§3
Input a code number referring to the table on page 15.
§4
If the language selected for “Audio” is not available, subtitle appear in
that language (If available on the disc).
§5
[U.S.A.[and\Canada[
§6
[Asia]
§7
\Australia\and\N.Z.]
[DVD-F87]only]
When you connect with AUDIO OUT 5.1 ch (➜ page 4) and select “Multi-channel”(➜ page 12, “Speaker Setting” in “Audio” tab)
Icon examples:
Surround speaker (LS)
≥Large: Select when the
speaker supports low-frequency (under 100 Hz) reproduction.
≥Small: Select when the speaker does not support low-frequency
reproduction.
If the subwoofer is set to “No”, the front speakers will automatically be set
to “Large”.
(Effective when playing multi-channel audio)
If either distance d or f is less than e, find the difference in the relevant
table and change to the recommended setting.
1. Select “Test” and press [ENTER].
A test signal is output.
Front (L)_—)Center_—)Front (R)
:;
Surround (LS)(—————=Surround (RS)
2. While listening to the test signal, press [3 4] to adjust the
volume of the center and surround speakers so they are the
same apparent volume as the front speakers (s6 to r6).
(The front speakers cannot be adjusted here.)
3. Press [ENTER].
The test signal stops.
≥No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.
To finish the speaker setting
Press [3 4 2 1] to select “Exit” and press [ENTER].
Menu Language
§5
≥ English ≥ Français ≥ Español
§6
≥ English ≥
§7
≥ English ≥ Français ≥ Deutsch ≥ Italiano ≥ Español ≥ Português ≥ Svenska ≥ Nederlands
On-Screen Messages
≥ On ≥ Off
FL Dimmer
Changes the brightness of the unit’s display.
≥ Bright ≥ Dim
≥ Auto:The display is dimmed during play, but brightens when you perform some operations.
Auto Power Off
≥ On:
The unit switches to standby mode after about 30 minutes in the stop mode, irrespective of the SLEEP setting.
≥ Off
HighMAT
≥ Enable ≥ Disable (Unable to use the HighMAT function.)
QUICK SETUP
≥ Yes ≥ No
Re-initialize Setting
This returns all values in the Setup menus to
the default settings.
≥ Yes: The password screen is shown if “Ratings” (➜ page 12) are set. Please enter the same
password. After “INIT” on the display disappears, turn the unit off and on again.
≥ No
Changing the speaker setting to suit your speakers
Speaker presence and size (a)
m s
m s
d B
0
d Bd B
L
Exit
Test
LS
R
SW
C
RS
d B
0
0
0.0
0
0.0
b a c
a
a
c a
(LS) (RS)
a c b c a
Exit
Test
signal
Front (L) Center Front (R)
— Surround —
Subwoofer
LS
LS
NoLarge Small
Delay time (b)
d Center speaker
Difference Setting
Approx. 34 cm (1
1
⁄10 feet)
1.0 ms
Approx. 68 cm (2
1
⁄5 feet)
2.0 ms
Approx. 102 cm (3
3
⁄10 feet)
3.0 ms
Approx. 136 cm (4
2
⁄5 feet)
4.0 ms
Approx. 170 cm (5
1
⁄2 feet)
5.0 ms
f Surround speakers
Difference Setting
Approx. 170 cm (5
1
⁄2 feet)
5.0 ms
Approx. 340 cm (
11
feet)
10.0 ms
Approx. 510 cm (16
1
⁄
2
feet)
15.0 ms
Channel balance (c)
LS
RS
L
R
SW
f
e
d
C
: Recommended placement
Changing the player settings
7292En.fm 13 ページ ２００３年１２月２４日 水曜日 午前９時３６分