Panasonic DVD-S500 DVD Player User Manual


 
11
VQT5C22
Operations
Changing the player settings
Change the unit’s settings if necessary. The
settings remain intact even if you switch the unit
to standby.
Press SETUP.
Press e r to select the menu, and press q.
Press e r to select the item, and press q to
con rm your selection.
Press e r to select the settings
, and press
OK.
To return the previous menu, press w.
To exit, press SETUP.
Operation methods other than the above
procedure may be displayed. In that case, follow
the on-screen instructions.
Depending on the type of media, this unit’s
settings may be disabled.
SYSTEM
TV System
This menu contains the options for
selecting the color system that matches the
connected TV.
NTSC
It will change the video signal of a PAL
contents and output it to NTSC format.
PAL
It will change the video signal of an
NTSC contents and output it to PAL
format.
PAL60
It will change the video signal of an
NTSC contents and output it to PAL60
format.
Auto
Select this if the connected TV is
compatible with both NTSC and PAL.
Screen Saver
This setting enables the Screen Saver
to activate. Screen saver will start
automatically if the media playback is
stopped for about 5 minutes.
Resolution (DVD-S700 only)
Select a video resolution that is compatible
with the TV display capability.
Selecting “Auto” can automatically select
the best resolution.
HDMI CEC (DVD-S700 only)
When connecting this unit with the TV via
the HDMI cable, linked operations with a
connected device is possible.
TV Type
Set the TV Type on the DVD player
according to the TV you have connected.
4:3PS
16:9 aspect images are enlarged in full
screen with the both sides cut.
4:3LB
16:9 aspect images are displayed with
black bands on top and bottom.
16:9
4:3 aspect images are displayed in the
center of the screen.
16:9Full
4:3 aspect images are stretched to right
and left.
LANGUAGE
Display
This switches the language for display
menu.
Audio
This switches the language for output
audio.
Subtitle
This switches the language for subtitle.
Menu
This switches the language for disc menu.
AUDIO
Audio Out (DVD-S700 only)
This sets the audio output method when
connected to the “HDMI AV OUT” terminal.
Bitstream
When the connected equipment is
supporting Dolby Digital
PCM
When the connected equipment is not
supporting Dolby Digital
Dynamic Range
Adjusts for clarity even when the volume is
low through compressing the range of the
lowest sound level and the highest sound
level.
HDMI CEC protocol / Changing the player settings