Filter
Top Products
6
C
●
●
●
●
●
●
A
5
●
●
●
●
●
●
Assembling / Removing the pedestal
Assembly screw (4)
(silver)
M5 × 18
Bracket
Cover
Assembly screw (4)
(black)
M4 × 10
Base
■ Assembling the pedestal
2
A
C
D
B
E
1
3
■ Adjusting the panel to your desired angle
●
Do not place any objects within the full rotation range.
15°
15°
(View from the top)
Secure the base as shown below to prevent the TV
from falling over.
●
The place where the base is secured should be thick
enough and made of hard material.
Commercially available screw
(not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
from the cover.
2 Pull out the cover.
3 Lift the TV from the pedestal.
4 Remove the assembly screws from the bracket.