S P E C F I L E
ET-PKE200H
Ceiling mount bracket for high ceilings
As of April 2012
SFL12A009
1 /1
Specifications
Vertical correction angle: +10°, -40°
Horizontal slant correction angle: ±15°
Horizontal turn correction angle: ±10°
Dimensions (W × H × D): 264 × 864–1,464 × 264 mm
(10-13/32 × 34-1/32–57-5/8 × 10-13/32 inches)
Weight: Approx. 5.2 kg* (11.5 lbs*)
Applicable bracket assembly: ET-PKE200B
Parts
Projector mount bracket A (pole included) . . . . . 1
Projector mount bracket B (pole included) . . . . . 1
Pole joint bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Washer (M6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hexagonal nut (M6) . . . . . . . . . . . . . . . . . . . . . . 1
Snap pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Screws (M3 × 10) . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
*
Average value. May differ depending on models.
Description
This ceiling mount bracket is used when mounting a Panasonic’s applicable projector to high ceilings.
N
OTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional bracket assembly.
C au t io n:
• Mounting should be done by a qualified technician.
• Make sure that the mounting (ceiling) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
∅54
4-∅54
(2-1/8)
*
2
951–1,551
(37-7/16–61-1/16)
184.5
(7-1/4)
185.5
(7-5/16)
489.5
(19-9/32)
60
(2-3/8)
60
(2-3/8)
120
(4-23/32)
60
(2-3/8)
60
(2-3/8)
120
(4-23/32)
Projector
4-10
× 14
(13/32
× 9/16)
Adjustable in
30 mm (1-3/16) steps
The illustration shows the ceiling mount bracket
when it is combined with the ET-PKE200B and the
PT-EZ570/EZ570L/EW630/EW630L/EX600/EX600L/
EW530/EW530L/EX500/EX500L is attached.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions